Lowering a snow plow

[jellyghost 378]

My snow plow could use lowered about half an inch.  Is there an adjustment that will do that?

I am using the Tach-o-matic system on a C-101.

[pfrederi 17,666]

Are you saying it doesn't touch the ground when you lower it?  Unscrewing the circled knob will let the blade go lower.

[AMC RULES 37,127]

 

[skrusins 128]

It could be the lift rod. I think you can adjust with a 9/16 in. wrench.

[jellyghost 378]

ok.  Honestly, I hadn't ridden in quite a while, and I forgot about the circle knob!  I was too excited with hooking up the snow gear.

[Tankman 3,518]

My "Work Horse" didn't come with the lift adjustment.

Found one on eBay, installed right away.

 

Why Wheel Horse ever shipped Horses without the adjustment had me baffled.  Cost saving?