Vintage Trucks

[Horse Newbie 7,069]

6 hours ago, 19richie66 said:

So we were clearing some brush behind my house and found a crunched truck cab. ‘47/‘54 GMC. I love these trucks. Still have more to dig out but good for nothing but scrap. Keeping the emblems and whatever else I can keep for shop art when I get a shop  No telling what else is out there. I dontthink anyone around here ever threw anything away...... just pushed it out back.

We had a small car graveyard behind our house that belonged to a man that ran an auto repair shop.

I was doing the same thing- clearing brush, and ran upon plenty of old BURIED car parts...door handles, mirrors, antennas, chrome/ stainless steel body molding.

I was amazed at how those pieces held up being buried in the soil...wish those old car parts could have talked...

[19richie66 17,500]

2 hours ago, WVHillbilly520H said:

At least you are able to get things done this time off year instead of summer where stingers and fangs are hiding ready to strike. Cool find, was looking at used lathes on eBay and found this...

Yeah no snakes in this cold weather. I want a lathe so bad 😢

[bc.gold 3,403]

12 hours ago, WVHillbilly520H said:

At least you are able to get things done this time off year instead of summer where stingers and fangs are hiding ready to strike. Cool find, was looking at used lathes on eBay and found this...

 

Same lathe sold under many names, grizzly, and king. I'll post these images of the head-stock and see if you can pick out the weakness engineered into its design.

 

 

[Pullstart 62,837]

Looking for pictures of my enduro car, I found a couple fun ones to share.  I’ve always had a knack for creative loading techniques!

 

 

[Pullstart 62,837]

Big or small, I’ll mud bog ‘em all!

 

 

[19richie66 17,500]

@PeacemakerJack here’s some for you 

[ebinmaine 67,432]

1 hour ago, 19richie66 said:

@PeacemakerJack here’s some for you 

 

 

 

That crew cab.....

[PeacemakerJack 10,738]

Those are beauty’s Richie...where did you find those—online or in person? I’ve always thought it would be super cool to own another Scout like my dad has or even a full size IH play truck.  Doubt that will happen any time soon—but, I can dream😎

[19richie66 17,500]

2 hours ago, PeacemakerJack said:

Those are beauty’s Richie...where did you find those—online or in person? I’ve always thought it would be super cool to own another Scout like my dad has or even a full size IH play truck.  Doubt that will happen any time soon—but, I can dream😎

Online... would love to have the first one.

[rjg854 11,360]

5 hours ago, 19richie66 said:

@PeacemakerJack here’s some for you 

 

 

Oh I love the looks of that truck, it's bad @$$

[JCM 9,130]

Pulled the K-20 out this weekend for a warm up and some sunshine.

[Pullstart 62,837]

Saw this sweet K10 at my niece’s birthday party this weekend...

 

 

[bc.gold 3,403]

 

Edited February 22, 2021 by bcgold

[WVHillbilly520H 10,373]

[Tractorhead 9,064]

6 hours ago, pullstart said:

Saw this sweet K10 at my niece’s birthday party this weekend...

 

 

 

If that goes further that Way,

i fears my next Visit ends up a one way Fly ticket and a ride back with RoRo 

 

[JCM 9,130]

I think on here somewhere I mentioned when I picked this Scottsdale R-30 up after it showed up at the dealer after waiting 3 months I drove it home and got 5 mpg with it.  454 TBI  4.10 rear 4 speed  trans. I thought I may have seen more than this as it sits Cab & Chassis. After panel body and loaded up with tools and equipment I ended up just over 7 mpg after break in. Still wouldn't change it for anything and boy was that a blast to drive without the body, of course I had to break it in the correct way for a few months before working it.    

Edited February 23, 2021 by JCM

[Tractorhead 9,064]

I have a Chevy long bed closer in my visor it’s out of the 80‘s.

what you lads can say about the straight 6 Engines, are they worth a closer look?
To be honest i have no clue about the straight 6 Engines from GM.

 

It never will become a rocket i know that.
It shall be sold this year and looks very solid from the Body itself for a absolute reasonable price.

It was even possible for a History license, what bring it closer to my interest.
Is it worth a closer look, or is it a „keep your fingers away“ Engine?

I‘m like to use it as my daily worker,

it shall be reliable and i think it fit‘s now to my lifestyle.
 

[WVHillbilly520H 10,373]

17 minutes ago, Tractorhead said:

I have a Chevy long bed closer in my visor it’s out of the 80‘s.

what you lads can say about the straight 6 Engines, are they worth a closer look?
To be honest i have no clue about the straight 6 Engines from GM.

 

It never will become a rocket i know that.
It shall be sold this year and looks very solid from the Body itself for a absolute reasonable price.

It was even possible for a History license, what bring it closer to my interest.
Is it worth a closer look, or is it a „keep your fingers away“ Engine?

I‘m like to use it as my daily worker,

it shall be reliable and i think it fit‘s now to my lifestyle.
 

The biggest drawback of the last of the GM 250 straight 6s was the (1 piece) integral cast-in head/intake manifold , my father had an 81 2wd long bed 250 with the granny LO 4spd, decent runner nothing brag about... Here's some reading for you... https://www.gmsquarebody.com/threads/intergrated-heads-options-and-modification.1635/#:~:text=Between 1975 - 1984%2C an integrated,intakes for trucks after 1978.&text=The L22 was a 250,of torque with the 250.

[WVHillbilly520H 10,373]

1 hour ago, JCM said:

I think on here somewhere I mentioned when I picked this Scottsdale R-30 up after it showed up at the dealer after waiting 3 months I drove it home and got 5 mpg with it.  454 EFI  4.10 rear 4 speed  trans. I thought I may have seen more than this as it sits Cab & Chassis. After panel body and loaded up with tools and equipment I ended up just over 7 mpg after break in. Still wouldn't change it for anything and boy was that a blast to drive without the body, of course I had to break it in the correct way for a few months before working it.    

I think I got between 7-9 mpg empty or loaded, definitely 454 with a Q-jet ,SM465 gears are either 3.73 or 4.10? (since I'm not the original owner who knows) and it weighed in at 7880# empty when I got 3 ton of stone for a grand total of 14080#...

[Pullstart 62,837]

14 hours ago, Tractorhead said:

I have a Chevy long bed closer in my visor it’s out of the 80‘s.

what you lads can say about the straight 6 Engines, are they worth a closer look?
To be honest i have no clue about the straight 6 Engines from GM.

 

It never will become a rocket i know that.
It shall be sold this year and looks very solid from the Body itself for a absolute reasonable price.

It was even possible for a History license, what bring it closer to my interest.
Is it worth a closer look, or is it a „keep your fingers away“ Engine?

I‘m like to use it as my daily worker,

it shall be reliable and i think it fit‘s now to my lifestyle.
 

Like  tractors... Run don’t walk Stefan!  Go get it!    The torque from an inline engine is very impressive.  Their reliability is quite amazing too!  These ones are pushing 450-ish horsepower.  

 

 

[WVHillbilly520H 10,373]

1 minute ago, pullstart said:

Like  tractors... Run don’t walk Stefan!  Go get it!    The torque from an inline engine is very impressive.  Their reliability is quite amazing too!  These ones are pushing 450-ish horsepower.  

 

 

They integral cylinder head (cast-in) intake manifold make this era inline 250 6 hard to "modify" for that kind of power, reliability/durability may not suffer IDK, but the 1981 my dad had, I rebuilt in high school Auto Mechanics Vo-Tech class that head/manifold weighed nearly as much as the block and a PITA to remove and reinstall for my 100# body back in 88/89.

[Pullstart 62,837]

2 minutes ago, WVHillbilly520H said:

They integral cylinder head (cast-in) intake manifold make this era inline 250 6 hard to "modify" for that kind of power, reliability/durability may not suffer IDK, but the 1981 my dad had, I rebuilt in high school Auto Mechanics Vo-Tech class that head/manifold weighed nearly as much as the block and a PITA to remove and reinstall for my 100# body back in 88/89.

Yes, these are surely not stock.  They sure can sing a beautiful song though!

[WVHillbilly520H 10,373]

@pullstart , @Tractorhead, I know its an evilbay listing but check out the pictures of said cylinder head/intake manifold...https://www.ebay.com/i/283544460393?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=283544460393&targetid=1068323861910&device=m&mktype=pla&googleloc=9008341&poi=&campaignid=11760623953&mkgroupid=117768894441&rlsatarget=pla-1068323861910&abcId=9300462&merchantid=6296724&gclid=Cj0KCQiA7NKBBhDBARIsAHbXCB5VQWtUOgLiYaS4uDPLYEz98uDBUOaDQpXGoVuDRpmH1cXxdE_ZPK4aAs6QEALw_wcB

[Pullstart 62,837]

Wow, what a mess!

[WVHillbilly520H 10,373]

13 minutes ago, pullstart said:

Wow, what a mess!

30+ years ago, quite the learning experience, and back breaking as well, milled/cleaned the gasket surfaces, regrinding the valves and seats, knurling the guides, didn't bore then block but honed and new rings and bearings, and possibly the timing gears, ran good for another 3 years before he got an '87 2wd LB with the 4.3 V6 3 on the tree and manual brakes very rare for the time ,last of the square body 1/2 tons.