rsmall5206 6 #1 Posted November 25, 2017 What kind of oil do you all run the rear of hydro? And how much will it hold? On a 1976 61-16kso03 sn 23867 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,102 #2 Posted November 25, 2017 The appropriate 2 pages of the lube chart have been added to this page. Click on the fuzzy picture. After it opens you will see 6 small pictures. Click on the two on the right and they will enlarge. Garry Share this post Link to post Share on other sites
Sarge 3,463 #3 Posted November 25, 2017 10w30 engine oil is what is required , can't remember the capacity but it's only a few quarts total . I generally just buy the 5 quart jugs of Mobil One 10w30 synthetic . Make sure the trans has the correct hydraulic filter on it , not a regular car engine oil filter as they aren't the correct specification for a hydraulic system . Sarge 2 Share this post Link to post Share on other sites
stevasaurus 22,878 #4 Posted November 25, 2017 It is possible that you have automatic transmission oil in there...if it is red, use auto...if it is tanish, use 10w30. Use the one that is in there...do not change to the other kind. 3 Share this post Link to post Share on other sites
953 nut 55,860 #5 Posted November 26, 2017 A NAPA 1410 filter is proper for a hydro. Share this post Link to post Share on other sites
