Jump to content
porschpow

Wheels/ Tires

By porschpow, in Restorations, Modifications, & Customizations

Recommended Posts

porschpow    7

porschpow
Posted

Hey Guys,

 

I have found out that I have a fast leak on the front  "drivers" side tire and a slower one on the rear "drivers" side tire.  Do you guys know where the best place to find tires (they're a bit worn), and tubes?

 

Not to mention, what is the best way to get them off the wheel?

 

Thank you in advance!

Share this post

Link to post
Share on other sites
 

953 nut    55,190

953 nut
Posted

If you have a Tractor Supply or Rural King near by they should have the tires and tubes. Any tire repair shop could mount them for you.

Share this post

Link to post
Share on other sites
 

Dan693    510

Dan693
Posted

Miller tire online has a ton of tires and tubes. Prices are good also. I also got some Hi-Run ags that I ordered through Walmart.

 

Harbor Freight sells a mini tire changer setup for like $40. You'll spend that or more at a tire shop.

 

FYI

Share this post

Link to post
Share on other sites
 

Sarge    3,463

Sarge
Posted

The last pair of ags I bought were for the front of Big Ugly (D180) - I went with the 18-8.50/8 stock size from BKT and so far have been very impressed with how well they are wearing despite that monster's weight and using a 56" blade with it , most of the nubs are still intact even working on rough rock surfaces . Think I picked those up off the auction site if I remember correctly and the price was great...

 

Sarge

  • Like 1

Share this post

Link to post
Share on other sites
 

96WS6TA    37

96WS6TA
Posted

greater Cleveland tire!

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Jon Paulsen
      Perfect Tires for Me :D
      By Jon Paulsen
      Inexpensive - Carlisle X Trac ATV Bias Tire - 16x6.50-8 Good quality (I expect) Should look nice with my large rear aggies  
      I don't know how much these have been discounted, but I expect anything you find like this from a good brand will be 2X to 3X the price. $45 each at Amazon. This tire is discontinued. 
       
      Rough measurement seems they are about 16" tall and the lugs are about 1/2" deep. 



    • PWL216
      Aftermarket Front Rims for C Series
      By PWL216
      Are there aftermarket front rims available for C Series tractors? I have a 120 and a 160 that need front rims… thx.
    • MachXXII
      1988 252-H Wheels
      By MachXXII
      I’m trying to restore my grandfathers old 252-H to use around my property. The tires are shot and the rims aren’t too far behind. Anyone have any recommendations for rims and tires that would fit well on it? 
       
      right now it has 22 x 7.50 - 12 on the back and 15 x 6 - 6 on the front.
    • heysavoy
      Tires for #31-12KE01 312-H
      By heysavoy
      I have a 1990 wheel horse classic model # 31-12KE01 and need to replace all 4 tires. The sizes are 15x6 8 NHS on front and 23x9.5 12 NHS Rear. I'm wondering if anyone has any specific tire they have purchased and found to be reliable? I have an acre yard with a few hills but nothing severe. I've looked at Carlisle, Marastar to name a few. Also do most folks keep the same rims and take them all in at one time to a local tire garage to have them mounted or just buy new ones with rims? Is having the correct size shown above all I need in order to make sure its an exact fit for my tractor?
×
×
  • Create New...