carlosking450 155 #1 Posted November 2, 2017 Hello everyone can tell me the length of a 702 belt, I would like to compare it with mine because I think that the one I have is not correct, besides the one I have is jagged and for this system I think it is better smooth belt. Is there a trick or place where the regulation of the clutch and brake is explained? Thanks Share this post Link to post Share on other sites
Racinbob 11,237 #2 Posted November 2, 2017 It's a 1/2" x 70" belt, part #1576.. I'm not sure what you mean by regulation of the clutch and brake. I know the manual states to depress the brake/clutch halfway when shifting while moving but that's something you shouldn't do. Always come to a complete stop before shifting. These transmissions aren't synchronized. Share this post Link to post Share on other sites
rmaynard 15,610 #3 Posted November 2, 2017 Some loss in the Spanish to English translation, but I think he means adjustments. Which may be covered in the owners manual. Share this post Link to post Share on other sites
carlosking450 155 #4 Posted November 3, 2017 I just need the adjustment, I do not have the owner's manual, what I understand is that you have to adjust it with the strap cap on, but I do not know why. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,102 #5 Posted November 3, 2017 The only adjustment is for the pedal height for a short or tall operator. Garry 1 Share this post Link to post Share on other sites
carlosking450 155 #6 Posted November 3, 2017 Hello everyone again, I've been looking at the 702 exploded and I see that under the engine has a support, my 702 has the engine attached directly to the chassis, is this or missing the support between chassis and engine? Share this post Link to post Share on other sites
Racinbob 11,237 #7 Posted November 3, 2017 (edited) That is only used on the 552 and 502 with the Tecky (Lawson) motor. Your Kohler doesn't need it. Edited November 3, 2017 by Racinbob 1 Share this post Link to post Share on other sites
