Kohler vs. Tecumseh

[AHS 1,440]

9 hours ago, Maxwell-8 said:

I guess diesels just keep going due to the compression and insanely heavy flywheel but now I am getting  Srry

@ebinmaine “My seat of the pants dyno” 😀💪 and the flat torque curve look a lot like that of a 292 Chevy or a 300 Ford… “but now I am getting off topic… sorry”. 
I had too!!🇺🇸😀

[RED-Z06 2,221]

OH160/OH180 were great engines, comparable to yhe K341 of the day. 

 

Kohler attempted...and failed to produce a similar OHV engine, the K361 OHV...popular on Power Kings and famous fir dropping valve seats on a discontinued head 

[ebinmaine 67,592]

5 hours ago, RED-Z06 said:

OH160/OH180 were great engines

I'm certainly more than a little curious to see how my 2 perform. 

 

 

 

[RED-Z06 2,221]

3 hours ago, ebinmaine said:

I'm certainly more than a little curious to see how my 2 perform. 

 

 

I had a Sears GT/18 with the 18hp variant...the balance wasnt quite right but it was a nice engine.  What got me was the fuel pump built into the carb..mine failed and couldn't at the time find parts

 

[ebinmaine 67,592]

@RED-Z06

 

I'll have to take a second look at this 16 horse. I know the fuel pump is out in the front of the engine somewhere but I don't ~think~ it was connected to the carburetor??

 

 

[RED-Z06 2,221]

1 hour ago, ebinmaine said:

@RED-Z06

 

I'll have to take a second look at this 16 horse. I know the fuel pump is out in the front of the engine somewhere but I don't ~think~ it was connected to the carburetor??

 

 

I have no doubt mine was some kind of rigged up trash...they had a threaded fitting into the carb inlet then over to a metal pump threaded onto an extension.

[Snoopy11 5,714]

3 hours ago, RED-Z06 said:

I have no doubt mine was some kind of rigged up trash...they had a threaded fitting into the carb inlet then over to a metal pump threaded onto an extension.

Dang... I'd start pulling out my moustache hairs if I saw that... 

 

Don