Jump to content

 
Countdown To Christmas!
 

 
Dave 520h

broken 520 h rear axle

By Dave 520h, in Transmissions and transaxles

Recommended Posts

Dave 520h    1

Dave 520h
Posted (edited)

I'm looking for a rear axle for my 520h.  Anybody have one?  I have a loader on the tractor and this is the second time I broke the axle.  I would consider a complete rear end.

Edited by Dave 520h

Share this post

Link to post
Share on other sites
 

pfrederi    17,887

pfrederi
Posted

Post this in the wanted classified section.  Also check with our vendors like A to Z tractor.  Curious do you have duals???

 

http://www.wheelhorseforum.com/forum/169-a-z-tractor/

  • Like 1

Share this post

Link to post
Share on other sites
 

daveoman1966    3,762

daveoman1966
Posted

I ahve a pair....10 and 13" .  Which do you need?

520h ax (5).JPG

520h ax (4).JPG

520h ax (2).JPG

  • Like 2

Share this post

Link to post
Share on other sites
 

953 nut    55,845

953 nut
Posted

:WRS:           As this is the second axle you have broken it begs the question as to why they are going bad. Do you have dual rear wheels? If you do, the air pressure in the outer tires should be run very low to reduce the load on the axles. With a loader the more weight you can attach to the wheels the less strain the axles will feel. If you have a weight box loaded up and drive over uneven ground that can put a lot of load on the axle too.

  • Like 3

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing
  • Similar Content
     
     
    • Poppa Phill
      60 inch Deck Mule
      By Poppa Phill
      Ive Got an 88 520 and a 60 inch deck. 
      My 522 gave up the ghost and being up here in maine I refused to buy a JD .
      Needing the deck mule with the spring,
      also looking for a soft cab.
       
      Thanks
    • Joe Reese
      60 Inch Mower Deck
      By Joe Reese
      60 Inch wheel horse mower deck with no rot. All spindles greased and spin smoothly. Comes with mule pulley guard & deck belt covers and the rare offset front mule. Has standard blades installed. Have brand new gator mulching blades for an additional $50 Great       Joe Reese    



    • Duramax7man7
      $1,175 OBO [419 hrs] 93 312-8 w/ 520h FS Axle + 42" Deck
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • RJ Hamner
      Loosing power after 30–40 minutes use
      By RJ Hamner
      Now that we are finding more uses for the 1990 520H with a KwikWay loader I am experiencing some power loss in the hydro after about a half hour to 45 minutes??????
      Ideas?
    • lodestonefarm
      1995 520H, snow blower, 60" mowing deck
      By lodestonefarm
      Selling my trusty WH520H.  ~880 hours (currently used for moving snow when needed so hours may rise) very solid machine, strong and hardworking.  20HP Onan, hydro transmission and hydraulic lift.  Has Matt's foot-pedal conversion for forward/reverse.  Included in the sale is a tall-chute snow blower and 60" mowing deck.  The blower is in excellent condition and is on the tractor currently.  The mowing deck has been a workhorse over the years.  No holes but could use some TLC, probably needs new spindles at some point and could use a couple spots touched up with welder also does NOT have any pulley covers/protectors (see photo).  Tractor has been an incredible tool, very solid and dependable and I'm certainly going to miss her when she's gone.   
       
      Recent maintenance: replaced the plugs this summer, fluids as needed (hydro has about 100 hours on fluid/filter; oil was done in the spring and has about 25 hours on it).  Battery is about 3 years old as are the tires, Terra Trac tires on the rear and turfs on the front.  The seat (with arm rests) isn't in great shape.  I've got a cover for the seat, never used.  It's never really bothered me but new seat cover is included in sale as are 4 hub caps, chains for the rear tires, and some misc spare parts (see photos).  
       
      I've owed this machine about 8 year and put ~350 hours on her.  She's not a show piece but could be restored.  Sheet metal is generally in shape, no rust however the hood does have a couple dings in it.  
       
      I'm only selling because I'm trying to help my son get a small lawn care business started and looking to move to a zero-turn.  The 60" deck is too large for our trailer, the mowing deck lacks pulley safety shields, and we'd like something that mows faster.  My only complaint with this machine is the top-speed (which isn't great when comparing to today's machines) otherwise she's a beast.  They don't make them like this anymore.  





    		 
×
  • Create New...