Cape Codder 5 #1 Posted August 20, 2017 Are there any covers available that will fit the low back of the Wheel Horse seat ? Share this post Link to post Share on other sites
953 nut 56,228 #2 Posted August 21, 2017 I am unaware of any seat covers specifically resigned for the seat on a 310. Good quality replacement seats can be purchased at Tractor Supply and other store of that type. If yours has the newer type seat that has a seat switch strip built into it you can remove it from the old seat and slide it into the slot provided in the new seat. The switch I am referring to looks like this and slides into a slot provided in the seat's foam on newer models. No special tools needed. 1 Share this post Link to post Share on other sites
Cape Codder 5 #3 Posted August 22, 2017 My Toro Wheel Horse 310-8 has the switch right near the gas cap and another piece mounted under the seat frame that depresses the switch when seated. The original seat has some tears that I covered with Gorilla duct tape . I thought it would be easy just to find a slip cover seat to protect it from further damage. This replacement from Tractor Supply will probably work but I like keeping the original. Thanks https://www.tractorsupply.com/tsc/product/low-back-mower-seat-black?cm_vc=-10005 Share this post Link to post Share on other sites
