Indiana_Steve 124 #1 Posted August 9, 2017 I have a 0621 RD deck and there is something I have been wondering about for a long time. The rear wheels are "floppy" and I was wondering if that is the way they were designed. The bolts are tight but the linkage to the wheels have sleeves so even if the bolts are tight there is a lot of movement. Is this normal? Deck mows well. Share this post Link to post Share on other sites
953 nut 55,073 #2 Posted August 9, 2017 Deck wheels have greasable bearings and are mounted on shoulder bolts, may not have been kept lubricated. Share this post Link to post Share on other sites
Indiana_Steve 124 #3 Posted August 9, 2017 Yes they are but the wheels themselves aren't the issue, the linkage that adjust the wheels is. Both sides the same so was wondering it that the way they are. Share this post Link to post Share on other sites
N3PUY 1,031 #4 Posted August 9, 2017 I think it's "picture time"! 4 Share this post Link to post Share on other sites
Indiana_Steve 124 #5 Posted August 9, 2017 Here's a video of what I am seeing. Whatcha think? M4H04373.MP4 Share this post Link to post Share on other sites
skrusins 128 #6 Posted August 9, 2017 (edited) Maybe a worn out spacer I think the part no. is 102704 Edited August 9, 2017 by skrusins spelling 2 Share this post Link to post Share on other sites
N3PUY 1,031 #7 Posted August 10, 2017 Looks like a carriage bolt with nut. Put a flat washer between the two pieces. Share this post Link to post Share on other sites
JC 1965 1,530 #8 Posted August 10, 2017 Take the wheel off and check the spacer. My guess is you need a new spacer and maybe a new carriage bolt ( depending on wear ). Share this post Link to post Share on other sites
