Jump to content
drewd

36" RD conversion

By drewd, in Implements and Attachments

Recommended Posts

drewd    55

drewd
Posted

Hi, I found a 200 series RD 36" mower (05-36XR01-11097) in really great shape. It was from a vertical shaft mower and had the mower drive belt guide towards the rear as a separate unit (not on the front spindle). I am trying to convert it to use on my 1972 Commando.  The spindles are have round shafts with grease fittings.   The spindle shafts look long enough to use the double belt pulley on the front spindle.  Can you still buy the double belt pulleys that will fit on these round spindle shafts?  Any suggestions are greatly appreciated!  I have two double belt pulleys from old decks but the are for the shafts with two flat sides!

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    11,088

gwest_ca
Posted

The decks with the 3/4" round shafts are the latest design they used so parts including blades are much easier to find.

This is what you are trying to get to using the appropriate drive belt I think

Garry

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • wheeledhorseman
      Blade Dozer 42in 1983-1986 06-42BB02 Snow OM TIPL SN.pdf
      By wheeledhorseman
      Operator manual #810296R1
      4 pages 848.00KB

      IPL from Toro Master Parts Viewer
      2 pages 171.30KB

      Fits
      1983 B-Series and LT-Series See Product Service bulletin
      1984 B-Series and LT-Series
      1985-1986 200-Series
      For vertical shaft 200 series models 1985 onwards but was also used with 1979-80 B series models (supplied with different lift rod) Fits for example B-165 or 216-5.

      Dozer 1983 42in model 06-42BB02 Complete
      1983 serial numbers that have shown up for the 06-42BB02
      19345
      20452 - Build date 1983 3259 September 16 Friday
      20551 - Build date 1983 3259 September 16 Friday [259] Guess


      Dozer 1984 42in model 06-42BB02 Complete
      1984 serial numbers that have shown up for the 06-42BB02
      23294 - Build date 1984 4193 July 12 Thursday

      Dozer 1985 42in model 06-42BB02 Complete

      Dozer 1986 42in model 06-42BB02 Complete

      Link to service bulletin
      http://www.wheelhorseforum.com/files/file/469-wh61-90-315-snow-equipment-1982pdf/
    • Willhaven
      Convert Bagging System to a Mulch/Side-Discharge on a 211-5SB?
      By Willhaven
      Does anyone know if you can make a 211-5 Single Blade (30”) a mulched or side discharge? I only have the bagging system but would like to mulch (if possible) with my new Oregon Gator Blade.


    • Willhaven
      Modification by adding deck wheels to WH 211-5
      By Willhaven
      Has anyone tried adding/installing deck wheels to a WH 211-5SB? If so, is there a specific make/model that would work best on this tractor? My lawn doesn't have the most level of surfaces, so adding wheels will save me from multiple scalpings (I think).




    • Willhaven
      WH 211-5SB Air / Gas Filter
      By Willhaven
      Trying to find the part numbers for my 1989 211-5SB air filter and gas filter. I was able to find the old part number for the mower blade (111144) which I cross-referenced with the Toro replacement but can't find filter info.
       
      Thanks!


    • Willhaven
      How do I remove the deck from my 211-5 WH
      By Willhaven
      My second post here, and apologies for a potentially amateur question. I've had my WH for a couple of weeks now and am looking for a manual, video, and/or someone's help here on how to remove the deck. I need to confirm the size of the blade (and replace it!)
       
      Thanks!
       
       


×
×
  • Create New...