Jump to content
Rollerman

Whatchamacalit

Recommended Posts

Rollerman

I find myself checking out the "Other Brands" thread quiet a lot....& feel a little guilty for not being a Wheel Horse purist.

The three Horse's I have do me fine, sure I'd like to have a couple more round hoods when & if I ever get my pull barn up....maybe a Speedex, one of them green round fenders, Powerking, etc, etc...

So to get this thread on track & end my rambling, I like the odd ones, hand built or obscure GT's that never caught on (see my Homesteader thread).

 

Whatchamacalit, I'm not sure what else to call this or what thread this should go under.:blink:

But Odd & Obscure fit it pretty good.

I believe it was built as a parade car?

It's 11' long & 55" wide, powered by an 8HP B&S, with a belt driven 3 speed car trans &  a car type rear axle.

No suspension & with all the weight towards the front, if the front end dips low enough to lift a back tire....there it sits.

 

What I have....a 22HP Predator engine, a HD 8 speed from a C series, a pair of Samurai axles & driveshaft's.

Maybe some 26" ag's or bigger, have to do some math, see what kid of gearing I would have in the axles & at the drive from the engine to the trans.

For suspension I'm thinking maybe a transverse leaf at the front & golf cart leaf springs in back.

Anyone seeing where I'm going with this?

Isn't it fun to dream & ramble.....

IMG_20170730_182229173.jpg

Edited by Rollerman
  • Like 7

Share this post


Link to post
Share on other sites
 
19richie66

That would be sweet with a set of sami axles. I think the 8 speed would hold up. Look at some of the abuse they go through. Weld up the differential in the tranny and go for it. Should be a cool project. Wish you were closer. I'd be all over that.

Share this post


Link to post
Share on other sites
 
Sarge

Not sure if you'd want my help with that thing - it may grow into this....

 

05222011552.jpg.6b687636581592189baa1d54f1096146.jpg

 

597f370819651_April17(2).jpg.7879ea85ee313622f76db73699f75481.jpg

 

597f3742c0265_flames2big(2).jpg.77cd4d434657be016ea9d7098f7c5863.jpg

 

@Tgtack might get a kick out of his old store site decal across the nose in front of the radiator . I had built a 1.6L Tracker/Swift GTi hybrid engine for this thing - over 150hp on 93 octane fuel....

 

HPIM0295.JPG.5d6c83c84a40620b49ec98a97408897e.JPG

 

Which all leads to days like this - result of a broken rear axle , the dumb thing just wanted to pivot over and flip - this was the 3rd time before we figured out why it wouldn't go through there...lol .

 

April23.jpg.77d28ae0234ad617e5dc787d7c170f73.jpg

 

Have fun , be safe...

 

Sarge

 

  • Like 3

Share this post


Link to post
Share on other sites
 
slim67
6 hours ago, Sarge said:

Not sure if you'd want my help with that thing - it may grow into this....

 

05222011552.jpg.6b687636581592189baa1d54f1096146.jpg

 

597f370819651_April17(2).jpg.7879ea85ee313622f76db73699f75481.jpg

 

597f3742c0265_flames2big(2).jpg.77cd4d434657be016ea9d7098f7c5863.jpg

 

@Tgtack might get a kick out of his old store site decal across the nose in front of the radiator . I had built a 1.6L Tracker/Swift GTi hybrid engine for this thing - over 150hp on 93 octane fuel....

 

HPIM0295.JPG.5d6c83c84a40620b49ec98a97408897e.JPG

 

Which all leads to days like this - result of a broken rear axle , the dumb thing just wanted to pivot over and flip - this was the 3rd time before we figured out why it wouldn't go through there...lol .

 

April23.jpg.77d28ae0234ad617e5dc787d7c170f73.jpg

 

Have fun , be safe...

 

Sarge

 

That looks like fun.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Donavon1
      By Donavon1
      Need some help deciding on a brand of engine to buy for my 1054. (Needs to be a diesel 10 hp+) I’m refining used motor oil/cooking oil for fuel for it. So it will have to have an option to run used oil and diesel 
    • sjoemie himself
      By sjoemie himself
      You know those people that have too many projects?? Yeah me neither!  
       
      Another tractor added to the heard. Case International 585 with canopy/sunroof.
      It's a 60-ish horsepower tractor with very limited electronic gimmicks. Has a nice tight turning radius. It was built in Doncaster from 1985 to 1990 and the hourmeter says it has ran 4700 hours since then, I'll take that with a grain of salt though.
       
      Plan is to use it for all kinds of jobs around the house and barn/stable for my gf's horses.
      Ofcourse it is not a new machine so there are things that will need looking after but all the basics are there.
      Pictures you say? Sure!
       

       

       

       
    • PWL216
      By PWL216
      I have for sale a 1984 C-105 with deck and Snowblower. I got this as part of a package. There’s no battery and I haven’t tried to start it. I’m selling it as a project. The deck has one spindle out, but with it, as prior owner claims bearing was replaced. The snowblower has the flag and looks to be in very good condition. All but 1 tire holds air. The mower is complete. Includes mule drive. The extra hood (c-175) you see in the picture can go with the tractor for an additional $50. Thx for looking.







    • OldWorkHorse
      By OldWorkHorse
      Working on a custom light bar for the recently restored 314-8 


×
×
  • Create New...