nwplyhlbly 0 #1 Posted July 10, 2017 i have never posted here before. two and a half years ago i purchased a Toro Wheelhorse 12-32 model 56175....to make things brief....would i be wasting my time rebuilding the toro 56-7110 differential with splined axles (which i have) and 15 tooth splined pinion gears (which i don't have) and 15 tooth smooth 3/4" bevel gears (which i also don't have). i could maybe acquire these piece by piece off ebay??? what i'm really asking is...was the square Toro 56-7110 differential a bad piece of be enginereeing? i don't have tons of money to work with, but i sure don't want to try to rebuild a differential that is easily broken....this mower has a strong 12 HP 281707 engine....not a lot of rust at all. transmission is peerless 770a or 700-070a....sprocket is 42 tooth. the mower works with a 13 tooth peerless 100 differential in all forward gears, but skips bad in reverse. Share this post Link to post Share on other sites
stevasaurus 22,878 #2 Posted July 11, 2017 Your 1989 horse is worth fixing...if you can get the parts for a fair price. Try our want ads in the Classified section. Try our vendors...like @A-Z Tractor. I have not rebuilt a Peerless trans, but the schematic did not look that bad. I would like to see some pictures, if you decide to tear into it. I don't think we have too much information about this on the site. Plenty of pictures may help you also. Let us know. Share this post Link to post Share on other sites
