Gas Tank

[fireinspect 1]

I noticed that there appears to be a piece of metal or fine mesh screen that seems to be sticking up right where the fuel goes to the fuel line or shutoff valve. My tank has a shut off under the tank that will swivel 360.  I have a few questions; is there a way to safely get the valve out of the tank without messing it up, is that piece of metal normal?  I cannot take a picture of it just because the tank is black so there is no way to get the flash to work and if I try to use a flashlight you cannot get the camera in close enough ..???  on a side note where is a good place to find the wiring diagram for the regulator?  I know a bit out of the fuel range but seems to be more and more issues... thanks for any help   Pat

Edited July 5, 2017 by fireinspect

[N3PUY 1,031]

The shut-off valve looks like this and has a screen.

 Sold many places and on eBay.   

If removed I'ld suggest replacing valve and grommet.

 

Edited July 5, 2017 by N3PUY

[gwest_ca-(File Mod) 11,040]

What is your tractor model number off the ID plate? Will try to link the correct manuals for you.

 

Garry

[fireinspect 1]

Np3uy, is there a part number or description I can use?

 

Garry, I will have to get back to you, we are having severe storms at the moment

 

 

thanks to both of you for the quick response

[N3PUY 1,031]

21 minutes ago, fireinspect said:

Np3uy, is there a part number or description I can use?

 

 

Just type "Wheel Horse fuel valve" in eBay or on the web.

Prices have a wide spread.

[fireinspect 1]

Thanks so much    sorry bout the name, N3puy...:)

Edited July 5, 2017 by fireinspect

[Racinbob 11,050]

Easier yet, @rmaynard has them here:

 

 

 

I just installed one of his.

[oldlineman 1,481]

Best to support our venders they support us!

[fireinspect 1]

oldlineman, is there a list of vendors?  i did not see it

[Racinbob 11,050]

On the front page scroll down to the classified. There they be. I've dealt with several of them and they are all first rate.

[Aldon 4,826]

In a side. Note I have had the internal valve clog and screen still look ok. Ethanol etc is bane of our time.

[N3PUY 1,031]

1 hour ago, Aldon said:

In a side. Note I have had the internal valve clog and screen still look ok. Ethanol etc is bane of our time.

yeah.... me too!  I popped the valve out, all nice and clean, but you couldn't get a pin thru the outlet.

It was full of rust.  Take it apart and clean it.