CountryRock 199 #1 Posted June 30, 2017 Looking for some input on the difficulty of changing the trans drive belt on my 246H. I'm planning on doing it in the next 2 weeks. It seems pretty straight forward but I want to make sure I don't mess anything up. Also going to change out the transmission cooling fan and would like to know if there is a certain way to go about that as well. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,102 #2 Posted June 30, 2017 All I know about these models is this manual applies to them Pay attention to how the belt guides are arranged before belt replacement. This appears to be the biggest complaint we see after the new belt is on. Garry Share this post Link to post Share on other sites
WHX?? 49,189 #3 Posted June 30, 2017 Not that difficult but your biggest issue might be in getting the PTO off without destroying it. They can be stubborn. Everything you need to know should be in the manuals Garry provided. Share this post Link to post Share on other sites
