Busman 14 #1 Posted June 29, 2017 Hey guys. I have a 1985 314-A (yes A not H) with the Eaton 700. Overall she runs fine but when mowing at a slow speed periodically I will stop moving even though the motion control lever is still in forward position. At this point I will have to push almost all the way forward to start moving again, of course this launches me forward rapidly. It is intermittent right now and I am hoping that a simple fluid change will solve the problem but wanted to see if anyone else has had this issue before? Share this post Link to post Share on other sites
Jerry77 1,218 #2 Posted June 29, 2017 You have a small tank under the seat - the level should be as described in the manual ( look in the manuals section ) . if it is too low it will probably act funny. Share this post Link to post Share on other sites
Busman 14 #3 Posted June 29, 2017 Awesome, thanks for the reply. Fluids look clean and full. I'm going to replace them hoping it's just a gummed up valve. Share this post Link to post Share on other sites
brad21875 6 #4 Posted June 23, 2020 Any luck with your 314-A? I have an issue with mine where it will just barely crawl in reverse. Share this post Link to post Share on other sites
