eibbed 63 #1 Posted June 19, 2017 (edited) Gentlemen, I was fiddling with the pedal and the brake lock on my 702 and now it is horizontal. What the heck have I done, and how can I fix it? Thanks, Dave Edited June 19, 2017 by eibbed I forgot to add pictures. Share this post Link to post Share on other sites
rmaynard 15,788 #2 Posted June 19, 2017 There is a pin that goes through this arm. Could be sheared. Share this post Link to post Share on other sites
Racinbob 11,398 #3 Posted June 19, 2017 most likely. Did you take the drive belt off? Share this post Link to post Share on other sites
eibbed 63 #4 Posted June 19, 2017 (edited) Hi Bob, Good news! I just went back out to look for a possible sheared pin, as you suggested. And as I was looking, I pushed the pedal as far forward as it would go. When I released it, it went right back in place. Thanks for your help, and nice hearing from you. Dave 35 minutes ago, Racinbob said: most likely. Did you take the drive belt off? No I didn"t, however when I was troubleshooting, I had the same thought, that maybe the belt had somehow come off the pulley. Thanks Racinbob Dave Edited June 19, 2017 by eibbed Share this post Link to post Share on other sites
