-
Similar Content
-
By nickjet67
Hello all, I recently acquired a "new" B-115, and with the help of @ohiofarmer, I will be fixing her up, first with a engine he is trading me for my old Kohler engine off my '77 B-80 that I trashed when I was 13. I haven't been in the Wheel horse game long, as I am 16 now, I hopefully will be able to keep this project updated on here, especially in the spring when I will be completely repainting it! I am super excited for this project, and am ready for all the challenges that lay ahead with it. if you have any helpful information you are willing to share about my newly acquired project, please share! I haven't had tons of luck finding tons of information about it.
-
By aboutime
I just got a CG7. I was wondering if anyone has tried anything to raise the mower deck height. The mower is adjusted as much as possible. The only thing that I see to help is to put taller tires on it. Does anybody have any suggestions.
-
By Dresden Guy
Operator manual #810661R1
Part 1 - 3 pages 4.39MB
Part 2 - 4 pages 3.59MB
Dated 06/89
Fits some 200-Series lawn tractors
Power grass collector 07-31PS01 available for this deck.
This is a better copy than the one that can be downloaded from Toro.
See product service bulletin "WH89-90 #T28 216-H 30in Mower Belt"
Mower 35-30SL01 serial # 20987 and lower requires longer belt # 114421 if used on a 216-H tractor
Mower Rotary 1990 30in SD model 35-30SL01
1990 serial numbers that have shown up for the 35-30SL01
0020987 - Shown in PSB #T-28
0022777 - Build date 1990 0005 January 05 Friday
0023367 - Build date 1990 0078 March 19 Monday
0023422 - Build date 1990 0078 March 19 Monday
0023423 - Build date 1990 0078 March 19 Monday
-
By Jparkes43
Hello on my kawasaki 227-5 17 hp single cylinder i was thinking about putting a straight through pipe on it and people time and time again were mentioning burnt or warped exhaust valves and i have no idea how bad this is or how common it is so i just want to know if i should or shouldn't straight pipe the engine
thank you
James
see my other thread about tachometer gauges
-
By Jparkes43
Hello I have a Wheel-Horse 227-5 with the 17hp kawasaki single cylinder engine and was interested in putting a tachometer on it (just because i won't too) but i need a step by step guide as I'm not sure what exactly i need to do, also if anyone could advise on a good tach to use that would help a lot, while I'm at i thought that i might put a oil pressure/temperature gauge on it.
thank you
James
-