Elkskin's mower junkyard 1,117 #1 Posted May 26, 2017 This past saterday i brought home a 702 parts machine. well it had some problems so i am in process of taking it apart. so today i got a little bored. i pulled 502 out and the 753. I pulled tank off 502 and it ended up on the 753 since the 753 tank leaks and i dont want to go through hassel of fixing the gasket. Now on the 502 I replaced the tower support arms and the steering support thing the one dad bought from toro was too thick and put the 702 gas tank steering wheel on it. sooo now its got everything where its supposed to be. but one question how many 1962 tractors here on redsquare have the adjuster for lift arm. something tells me it was put on by someone. 7 Share this post Link to post Share on other sites
Racinbob 10,859 #2 Posted May 26, 2017 I believe 63 was the first year for that. I've always maintained that after 50+ years and so much part swapping it's nearly impossible to know for sure what was factory original. Wheel Horse created enough oddities themselves but I'm betting the early years owners also created many and Wheel Horse was 'blamed' for it. You just put a 62 tank on a 63. Nothing wrong with that and I like it but somewhere down the road It could be said that Wheel horse was using up the 62 parts on 63's. I think the best way to say something is original is by looking at the original parts list. If something is different then Wheel Horse may have been up to their tricks or one of the owners over the years........ 4 Share this post Link to post Share on other sites
RedRanger 1,468 #3 Posted May 26, 2017 Don't think the 62's had the adjuster as Bob said. Mine doesn't. I even bought an adjustable lift mechanism to swap mine out and the mount holes didn't match up. So I left the original non-adjustable on. Based on the square bolts on yours, I'd say someone swapped them out. Doesn't look factory to me. 3 Share this post Link to post Share on other sites
Elkskin's mower junkyard 1,117 #4 Posted May 26, 2017 yea what i was thinking. dad likes it with the adjustable height so leaving it alone. however we did have a parts failure. yesterday we needed a bowl gasket for sedimate bowl. so we made one out of a innertube lol. well it worked until today .so i called up repair shop and asked taryl dactal is he had one. he said yes. so i bought 2. they are briggs gaskets but hey no more leaks. have one for the 754 too lol. 2 Share this post Link to post Share on other sites
Chris G 3,296 #5 Posted May 27, 2017 I've had several 702's and never had the adjustable lift. Had one that some one made from steel and notched it but that's it. I no they get replaced with newer style prettyoften. Cause the tab breaks off like the one in photo. Second photo is what it should be. 4 Share this post Link to post Share on other sites
Elkskin's mower junkyard 1,117 #6 Posted May 27, 2017 1 hour ago, Chris G said: I've had several 702's and never had the adjustable lift. Had one that some one made from steel and notched it but that's it. I no they get replaced with newer style prettyoften. Cause the tab breaks off like the one in photo. Second photo is what it should be. dads 502 was really only 62 we have had except the 702 parts machine i brought home 1 Share this post Link to post Share on other sites
Chris G 3,296 #7 Posted May 27, 2017 Hey ya can't go wrong with a good parts machine. The one in the pic with broken shift stop was a parts machine I snagged up earlier this month. 1 Share this post Link to post Share on other sites
Elkskin's mower junkyard 1,117 #8 Posted May 27, 2017 32 minutes ago, Chris G said: Hey ya can't go wrong with a good parts machine. The one in the pic with broken shift stop was a parts machine I snagged up earlier this month. yup. my dads 502 needed alot of parts lol 2 Share this post Link to post Share on other sites