CountryRock 199 #1 Posted May 12, 2017 I'm looking for information on how to adjust cut height and how to remove and install the deck on my 246H. The deck is model 05-38SS01. Thanks. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,168 #2 Posted May 12, 2017 Here is a start This may also apply Garry 1 Share this post Link to post Share on other sites
CountryRock 199 #3 Posted May 12, 2017 Thank you very much. Share this post Link to post Share on other sites
CountryRock 199 #4 Posted May 16, 2017 Is there supposed to be a bushing in the left rear lift slot like there is in the right rear. Picture for reference. Share this post Link to post Share on other sites
evanloock 221 #5 Posted May 16, 2017 The manuals that guest_ca posted show the guide bushing on both the right and left side brackets. Share this post Link to post Share on other sites
CountryRock 199 #6 Posted May 16, 2017 Probably should have checked those earlier. I just went by the diagram on the toro parts store site. Thanks. Share this post Link to post Share on other sites
