C-101 axle

[tallen4392 69]

Do any of you folks know if a c101 has 1 1/8 axles in it  thanks 

[Racinbob 11,238]

Sure does

[oldlineman 1,482]

I have a 1979 and it has them.

[C-101plowerpower 1,605]

mine doesnt

[tallen4392 69]

So am i to assume  that some came with them and some did not ??????

[Racinbob 11,238]

I'm thinking because it a European build maybe? 

[C-101plowerpower 1,605]

Just now, Racinbob said:

I'm thinking because it a European build maybe? 

 

that and mine has a 4speed

[Racinbob 11,238]

It's interesting about all the differences. All the C-series over here had 8 speeds and 1.125" axles.............wait, that's what they all are spec'd with. We all know the things Wheel Horse did at times.

Edited May 4, 2017 by Racinbob

[Ed Kennell 38,715]

Mine has 8 gears and 1- 1/8" axles.

[953 nut 55,873]

31 minutes ago, Racinbob said:

European build maybe?

           Or a previous owner put the four speed in it at some time during the past half century.

[stevasaurus 22,881]

The #5086 transmission has the hi/low range shifter with 1" axles (4 pinions).  All 1 1/8" axles newer then 1967 will have the hi/low range shifter with either 8 or 10 pinions in the differential.  I would just measure the axle on the outside of the hub. 

[meadowfield 2,595]

I've had a C-81 and 312-8 transmission both with 1" axles...  Bendys front end is 1" axle