48" SD deck issues

[Porkchop87 5]

As some of you know, I bought a 414-8 tractor and now I'm having deck issues, it's a 48" side discharge. I hooked up the front into the locking mechanism, I put the lift lever lock thing in with a cotter pin, but when I put the deck on I noticed this bar with this 90° pin, with a hole for a cotter pin to go into just laying there off the back of the deck, on the rack thing on the top of the deck. Couldn't see where this goes under the tractor, it kind lines up with a flat piece of steel with two holes on it, this is attached to the rod that sets the deck height. I don't have any pictures as I had to go to work. Hoping someone know's what I'm talking about. Maybe there's a manual or procedure to ensure I put thi's on correctly. Thanks guys!

[gwest_ca-(File Mod) 11,032]

Garry

[Porkchop87 5]

I've already got the schematic for the deck. Thanks though! I don't see that bar though. I'll just have to post some pictures of it

I see the bar, it's on the page with the belt for the pto hook up. Top left where it says adjustment see owners manual. 

[Porkchop87 5]

I'm guessing it's the rear trunion, I looked into the manual but it doesn't tell me where the rear trunion hooks.

Leveler bar. 

 

I found it. Had to do some digging but found it. Thanks! Lol

[daveoman1966 3,745]

here is a pic of a 48" deck with all the lift hdwe on it.

[Porkchop87 5]

Thank you that's what I needed!

Thank you that's what I needed! So how is this supposed to be adjusted?

[Lee1977 6,642]

On 4/10/2017 at 5:54 PM, Porkchop87 said:

Thank you that's what I needed!

Thank you that's what I needed! So how is this supposed to be adjusted?

 

The deck should be a 1/8" to 1/4" lower in the front. That rod is the adjustment changing the height of the front of the deck.