Jump to content
WHX??

A Very Unusual Score!

Recommended Posts

 
Achto

Nice score Jim! That is a beautiful survivor! Plus you got one with a set of good :wh: branded tires, we had just discussed getting a tractor with a good set of those on Sat. Great story on getting the one that you thought you had missed. Was the flipper the same  guy that runs Garden Tractor Daze? 

 

If you don't think you'll have room to store that one, I can make room in my garage.:D

Edited by achto
  • Like 2

Share this post


Link to post
Share on other sites
 
WHX??

LOl Thanks Dan Camper may have to sit outside tho! Good thing I cleaned out the warehouse Sunday.

12 minutes ago, achto said:

good :wh: branded tires, we had just discussed getting a tractor with a good set of those on Sat

Yes we did didn't we! These are the kind of tires that the horse could be outlined.

Yes he is the same guy but in the couple of years I have been going to this show this was the first I met him, heck of a good guy tho! According to Tom and him he has a lot of tractors in all stages.

Forgot to mention the seller said he was 2nd owner not including the flipper, he didn't have it long enough to count.  

Edited by WHX9
  • Like 1

Share this post


Link to post
Share on other sites
 
Rp.wh

Nice score! Can't wait to see that guy. Can't believe it worked out. 

Share this post


Link to post
Share on other sites
 
stevasaurus

That is a nice score Jim.  Of course, you know why he delivered??  It was already loaded.  SHORT FRAMES RULE!!!  :handgestures-thumbupright:  and 1967 was a Great Year.  :occasion-xmas:

  • Like 5

Share this post


Link to post
Share on other sites
 
Ed Kennell

Great story Jim, and kudos for sealing the deal on a great tractor.   :text-woo:

  • Like 1

Share this post


Link to post
Share on other sites
 
dclarke

That's a nice one, Jim.... Friends like Tom are nice to have! :handgestures-thumbupright: Glad it worked out.

  • Like 3

Share this post


Link to post
Share on other sites
 
elliot ness

Nice score.:text-bravo:

  • Like 2

Share this post


Link to post
Share on other sites
 
rj35hunter

 Very nice find! I hope you keep it original.....way too nice to restore! 😎

  • Like 3

Share this post


Link to post
Share on other sites
 
WHX??

That what the plans are rj, change fluids, pull the head, check things out in there, fix a few mechanicals, tighten things up abit, little spit & polish, say one Our Father three Hail Mary's & run her! :)

  • Like 4

Share this post


Link to post
Share on other sites
 
squonk

Nice! Now get on the stick and change your username! :teasing-poke:

  • Like 3

Share this post


Link to post
Share on other sites
 
KC9KAS
6 hours ago, WHX11 said:

Flpper has a WW II museum in Portage, WI and flips tractors of any brand, but is partial to Case's, to fund his other hobby

So, you met Bret Esse!

  • Like 2

Share this post


Link to post
Share on other sites
 
WHX??
27 minutes ago, squonk said:

get on the stick and change your username

Yes sir... right away sir!

 

5 minutes ago, KC9KAS said:

So, you met Bret Esse

SHHHH mums the word KC....I'd tell ya but then I'd have to kill ya :ychain:......the guy is a WH gold mine!! No wonder Tom comes a thieving way over here for bucket list tractors! :lol:

Edited by WHX11
  • Like 2

Share this post


Link to post
Share on other sites
 
slim67

Nice tractor ! I got one just like it:wh:

  • Like 2

Share this post


Link to post
Share on other sites
 
Texas Todd
8 hours ago, WHX11 said:

At this point I'm crappin twinkies and gotta pinch myself.....

Man that made me laugh! I gotta remember that one! :auto-layrubber:

  • Like 2

Share this post


Link to post
Share on other sites
 
857 horse

Jim,,,,,i gotta tell you,,,,a new main belt makes it feel like you tightened up all the gears,,,,,,

 

NOW,,,,,,you wanna tell me about those 3ribs on that tractor in the back ground ,,lololool....and it.Looks like its gonna be a cruzer

 

Your pickin cheerys ,,,,,good job !!!!!!!!!!!!

 

Howard 857 Horse,,,,,,,in Va

 

 

Share this post


Link to post
Share on other sites
 
WHX??

Feel free to use  @Texas Todd:)

 

 @857 horse ........ I was hoping you'd see this thread........Truth be told I always thought 857's were like a$$^&%$#....everyone's got them and most of them stink......when I met Dino @stevasaurus this was kinda confirmed........ lololol :ychain:Steve........ Thank you for the tip on the belt this one doesn't feel quite right. 

NOW ......as far as the tri ribs ......good eye Howard ...check out my thread in customs.......1067 mods.....cruzer may not be the word when it's  gonna get down and dirty.....lololol.....now I know why you do that .......the l&o are right next to each other on the keyboard.....lololol;)

 

  • Like 1

Share this post


Link to post
Share on other sites
 
stevasaurus

I think you are going to eat those words Jim.  The new rebuild of the K 181 is unreal.  I can't wait to try a plow on the back of the 857...the 876 also after rebuild.  :)  

   My 857 stinks??   May a camel riding Irocky, with a battery sawsall take 4" off one of your long frames.  :violence-blades:

He lives over here and down the road 2 miles.

tgus-s2-5-ep-12-2.jpg?itok=8X0IpyyK

 

OK, remember...just 4" off a long frame. 

Everyday-gear_1.jpg

 

We are looking for a Wheel Horse long frame.

camel-safari-vegas.jpg

 

Excellent...now that is what I am talking about.  May you never say anything bad about short frames again.  What you can do with a sawsall!!  :occasion-xmas:

DSCF8768.JPG?format=500w

 

  • Like 6

Share this post


Link to post
Share on other sites
 
Texas Todd

I don't care who ya are....that there's funny!:laughing-rofl:

Irocky's and crappin twinkies. What more could a feller ask for in a single thread?

  • Like 4

Share this post


Link to post
Share on other sites
 
953 nut
24 minutes ago, Texas Todd said:

What more could a feller ask for in a single thread?

Image result for weird photoImage result for weird photoImage result for weird photoImage result for weird photoImage result for weird photo          You asked for it!

  • Like 4

Share this post


Link to post
Share on other sites
 
Texas Todd

Well. There ya go! LOL!

  • Like 3

Share this post


Link to post
Share on other sites
 
WHX??

I forgot to add I  changed my tune on the 857's guys :hide:...glad we got some belly splitters in tho! :lol:

  • Like 3

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Bach-Ed
      By Bach-Ed
      I need a little part number help.   I'm looking for the part number of the idler pulley that tensions the drive belt on my 857.  The diagram shows the left side of the tractor.  And I can't seem to locate the pulley on the parts drawing.  The bearings have gone out on my tractor's idler.
    • Bach-Ed
      By Bach-Ed
      I needed to disassemble the brake/cluch linkage on my 857.   Am I missing something or do 2593 Clutch Rod, 5544 Parking Brake Lever and 3935 Brake Rod all need to be in place on 4899 Clutch Rod Pivot Arm  before I can struggle to align the holes with that of the 3950 Idler Arm Shaft to insert the roll pin?  I'm using up all my naughty words trying to get this back in place.  I'm hope someone can suggest a better way.  Or all you can do is extend your sympathies?
    • WHX??
      By WHX??
      Sadly Dan @Achto informed me the the other day of a 857 and a C-120 that was deposited at his local county dump. Dump rules are  such that once it hits the ground it stays due to junkyard dogs going to fisticuffs over scrap steel. Understandable  Despite some hastily made plans of bribery,  chicanery and/or hook or crook to rescue them we failed miserably. We may get drummed out of the Mafia for that one.
      I'll let Dan fill you in on the details if he has the stomach.  I would like to believe that that our beloved  ones would be smelted down to produce more tractors but then I wake up from that dream. Sorry no bone yard pics not that we would want to see them.
      Dan asked me if he had a problem over grieving over these lost gems. You decide... So in memoriam I feel it is quite nescessary to post pics of our lost loved ones. Since I don't have a C-120 here's what I have of a 857.  Please post your pics of either models. True story, I wouldn't hose you guys and not just fishin  for 




    • Bear G
      By Bear G
      Sold all three to one guy today..
      Sad to see them go, but...
      One of the reasons I’m selling is because I’m thinning my personal collection down to custom, modified only. So,  I’m selling all my “stock” tractors. 
      Ilk still have a few “flip tractors”, but hope to get down to about 4 I’m my personal collection.
      We’ve been up around a dozen for a year now.. too much to keep up with..
        I think these are going to a good home.
       






    • Bear G
      By Bear G
      Getting the 1st two of eight total ready to go to the show in New London, Oh. This weekend.
      the 857 and the 1054 still need some minor cleaning but they’re ready to load.
      Show is 7-27-18 to 7-29-18. Hope to see you there!!


×
×
  • Create New...