2017 Big Show Buy/Sell/Trade Thread HERE !!

[oldredrider 2,548]

Lowell, hope your sales make some room for the ride back. I've got some goodies to bring you at the show!

[wheelhorseman 3,211]

Oh I haven't forgot 

[rmaynard 15,434]

9 minutes ago, oldredrider said:

Lowell, hope your sales make some room for the ride back. I've got some goodies to bring you at the show!

 

He needs room for that York rake I've been storing for him. 

[WHX?? 48,814]

He will Ole Red..if he gets rid of that crusty tractor someone wants him to haul out out ther for him!  Have fun fellas 

Edited June 9, 2017 by WHX11

[Tgtack 779]

I am looking for the grass screen, metal fan, and mounting bracket(s) as shown in the picture for my 1276. Am also in need of a nice two spoke mid 60's steering wheel, and possibly a left side brake cover panel for an 854. I will be at the show.

[JPWH 6,033]

There is a brake cover on flea bay.

[stevebo-(Moderator) 8,330]

OK.... less than 2 weeks to go until the big show!! Let's see some more good stuff up for grabs here all!

[Aldon 4,826]

I have a bunch of GT14 spare parts, nos rear tires and rims and a Cseries rear metal fender pan i blasted and primed. PM me if your interested and I'll see if I have what you need.

[glenn27 71]

10 hours ago, Aldon said:

I have a bunch of GT14 spare parts, nos rear tires and rims and a Cseries rear metal fender pan i blasted and primed. PM me if your interested and I'll see if I have what you need.

///////////////////////////////////

That's good-Aldon..

I'm bringing some GT 14 specific parts, also.

 

Front Axle

Steering gear and  spindle-pin support

Side belt cover

"Fixed" gas tank

and a couple more things I need to dig out..

 

* I know one year when I was up there, looking for GT 14 parts--there were scarce...

 

glenn

[Aldon 4,826]

I have double and single Hydro pulleys, on smooth bore the other splined or whatever it's called. A pic of NOS tires on set of rims. (I have a forum member interested in tires and rims who gets first chance to purchase but if interested let me know and once I confirm, I'll let whoever is second in line know if they are available etc.,  some GT14 Hubs, spindles and misc, also have C series hub sets, 1 each for 1/18 and 1 inch bore, GT14 main front axles, pretty most a large part of GT14 minus frame and Hydro pumps. I do have some Hydro transaxle misc parts from when I split a couple for the rear axles. Also remembered I have this hydro pump I'd let go of for 90. And a set of GT14 rims that were blasted, primed and painted last year but need a refresh on the paint. I believe I have a set or two of tie rods which will need new ball joints...

 

As mentioned, pm me if you need something. I have no plan to bring stuff in hopes that it sells. If I don't pre-sell, it is not coming with me.

 

Edited June 11, 2017 by Aldon

[grnlark 479]

Too much stuff to list individual prices on everything. If you see anything of interest, let me know. Thanks

 

310-8 hood: Sold

Engine belt guard: Sold

 

 

Edited June 12, 2017 by grnlark

[fast88pu 3,324]

25 minutes ago, grnlark said:

Too much stuff to list individual prices on everything. If you see anything of interest, let me know. Thanks

What are you asking for the 310 hood? Pm me. Thanks

[grnlark 479]

300 series steering wheel and steering shaft

 

 

Edited June 12, 2017 by grnlark

[Aldon 4,826]

One set of spindles is now sold and the rear tires/rims are not available for pre-sale.

 

As before, of you have a GT14 part need, let me know. I do have another set of spindles.

 

[fast88pu 3,324]

Would like to sell one of my D250 decks. I have never mowed with this one. I have everything for it. Asking $500 obo. Make an offer. Thank you

[stevebo-(Moderator) 8,330]

I am looking for a brake/clutch rod for a 1057. If you have one, let me know. I am sure there will be 1000 of them in the vendor section. I am also looking for a set of 23.50 x 10.50-12 rear tires in very good to excellent condition. I am open to ags or turfs. 

[elcamino/wheelhorse 9,297]

Looking for material to reline manual PTO clutch.

[RJ Hamner 1,007]

Kohler K301

I bought this engine awhile back for a possible replacement for one of my tractors.

The guy I bought it from works at a machine shop and said it was rebuilt

It does not have an internal fuel pump

Don't really need it  now so..........$275 OBO

I can bring it to the show.

[fast88pu 3,324]

14 hours ago, stevebo said:

I am looking for a brake/clutch rod for a 1057. If you have one, let me know. I am sure there will be 1000 of them in the vendor section. I am also looking for a set of 23.50 x 10.50-12 rear tires in very good to excellent condition. I am open to ags or turfs. 

23.50 or 23"? 

 

[Vinylguy 4,674]

Last year we brought some aluminum signs and  did not have enough for everyone that wanted them.

Ran out quickly so we are bringing more this year. Here are two designs but I am wondering which design to make the most of?

A or B 

Your thoughts welcome.

 

[Darrenw85 605]

Terry,

I would be interested in Sign B.

 

Thanks,

Darren

[Aldon 4,826]

I like both but favor B over A

[grnlark 479]

B

[elcamino/wheelhorse 9,297]

I like B

[DJE 89]

I'd take a B.