Adams94 1,068 #1 Posted March 6, 2017 Looking at getting some fenders made for the c-195. Looking to see how much interest there is in any of these. They will be made out of fiberglass and will be set up for 1982 lever placement. They will be white, price will be $250 roughly. We havent started making them yet but will if there is enough interest. Let me know guys! 2 Share this post Link to post Share on other sites
edwroy 138 #2 Posted March 6, 2017 I would be interested in a couple. Edwroy 1 Share this post Link to post Share on other sites
Adams94 1,068 #3 Posted March 6, 2017 Good to know! Thanks Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,494 #4 Posted March 6, 2017 It would be nice to see reproduction fenders for all the black hoods. 2 Share this post Link to post Share on other sites
Adams94 1,068 #5 Posted March 6, 2017 24 minutes ago, T-Mo said: It would be nice to see reproduction fenders for all the black hoods. I agree, I figured I would start with these and see how it goes from there. 2 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,326 #6 Posted March 6, 2017 I would be interested in the 1984 style. Maybe you can just leave it complete and the owner can cut to fit either 83 or 84 style? 4 Share this post Link to post Share on other sites
Adams94 1,068 #7 Posted March 6, 2017 20 minutes ago, stevebo said: I would be interested in the 1984 style. Maybe you can just leave it complete and the owner can cut to fit either 83 or 84 style? The first mold we would make would be off a 82 fender but I figured even though the cut out would be there for lower lever placement you could still cut in the upper one, it wouldn't hurt to have that lower cutout I suppose. Share this post Link to post Share on other sites
bmsgaffer 2,043 #8 Posted March 6, 2017 (edited) 22 minutes ago, stevebo said: I would be interested in the 1984 style. Maybe you can just leave it complete and the owner can cut to fit either 83 or 84 style? Or better yet, have pre-scored locations (from the back side) for both and the owner will just 'knock out' the proper one... Edited March 6, 2017 by bmsgaffer 1 Share this post Link to post Share on other sites
ericj 1,578 #9 Posted March 7, 2017 i thought that there was somebody already reproducing the fenders for the 195. I've heard other people say that so and so bought one but never actually talked to the person that bought a repop fender. eric j 1 Share this post Link to post Share on other sites
Pollack Pete 2,273 #10 Posted March 7, 2017 There was someone making them at one time for sure.I bought one from RS member Baerpath.I have no idea where it came from.I do need another one though. 2 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,326 #11 Posted March 7, 2017 I purchased one of those repros from te guy who was selling them but have not seen him advertise them here or on bay nor do I remember who he was. I compared his with originals and the originals had a firm straight line on the outside fender where the repop was concave. 2 Share this post Link to post Share on other sites
Adams94 1,068 #12 Posted March 7, 2017 I have heard the same thing that somebody is making them but I have been watching for a year and haven't found one or the guy so I'm assuming he quit doing them Share this post Link to post Share on other sites
can whlvr 993 #13 Posted March 8, 2017 I personally like the standard metal fender on the xx5 series,dont care for the plastic look at all but that's just me Share this post Link to post Share on other sites
bmsgaffer 2,043 #14 Posted March 8, 2017 36 minutes ago, can whlvr said: I personally like the standard metal fender on the xx5 series,dont care for the plastic look at all but that's just me They are referring to the super c-195. It has a fuel tank filler up out of the back (not under seat) and hydro control cutouts, so the standard metal replacement wont work. 2 Share this post Link to post Share on other sites
Adams94 1,068 #15 Posted April 11, 2017 The mold is being worked on now, I hope to see the first one before long. 1 Share this post Link to post Share on other sites
elliot ness 1,916 #16 Posted April 11, 2017 Sounds like a great idea to me. 1 Share this post Link to post Share on other sites
Adams94 1,068 #17 Posted June 4, 2017 I got the first one done Friday am. Had it displayed at the Mentone swap meet. I am happy how they turned out and had a lot of compliments. One ordered already. I will post a classified add here soon. Well also may be looking into doing the seat pans for the other black good models 1 Share this post Link to post Share on other sites
Adams94 1,068 #19 Posted June 11, 2017 On 6/4/2017 at 8:50 AM, ericj said: eric j I plan on taking pictures today!! 1 Share this post Link to post Share on other sites
htopjimmy26 3 #20 Posted June 11, 2017 I might be interested in the 84 style. I may have to take what I can get. Share this post Link to post Share on other sites
Adams94 1,068 #21 Posted June 11, 2017 3 hours ago, htopjimmy26 said: I might be interested in the 84 style. I may have to take what I can get. Right now they are made to the 82 style. I don't have an 84 pattern to get the correct measurements for the holes yet. Pictures!! I had a lot of comments on these at the Mentone show. Aside from looking at the bottom they look identical to the original. They are heavier and not near as flimsy. 3 1 Share this post Link to post Share on other sites
