Transmission Apart! - what is normal to replace with assembly?

[Rustyred 63]

Hi guys,

 

My transmission is cleaned up and ready for assembly! The gasket of course will be new. I have put out the question of whether my gear damage warrants a replacement in another thread.

 

Two questions:

 

1. Are there any parts to a transmission that should be replaced every time it is taken apart? This thing is from 1979 - probably never taken apart before.

2. One axle needle bearing had fallen apart and I will replace it. The other one is fine. Would you replace it anyway? Or was the other just faulty?

 

Thanks again for the advice!

[pfrederi 17,910]

For about $6.00 (my bearing guys price not Toro they are common bearings) I would replace the other needle bearing Needle bearing failure is not a good thing.

 

This is what happens when an axle needle bearing fails

 

All the seals , Input, Brake and axles should be replaced again they are readily available from bearing houses and cheap.

[Rustyred 63]

I appreciate the response - the picture was helpful and I can say I got lucky - the bearing was shot and the axle was not yet damaged.