amiga4001 33 #1 Posted February 1, 2017 I want to replace my drivebelt off my wheelhorse B115. Got the old one off but it is so old and cracked can't find no numbers. Can anybody give a number off Gates or similar with the correct length and type for my nice machine? Share this post Link to post Share on other sites
953 nut 55,885 #2 Posted February 1, 2017 Your belt would be a 4L-880 or an A-86. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,104 #3 Posted February 2, 2017 Share this post Link to post Share on other sites
amiga4001 33 #4 Posted February 2, 2017 I measured the old belt and it is 12,7mm wide and about 223 cm in length. So guessing it is a 4L-880 belt. But that other type belt (A86) is almost identical? There is much price difference online,I can get a A86 from SKF for about 14 euro but if I want a more robust(gardengrade with kevlar reinforced?) 4L-880 from say contitech the price is about 35 euro. Is there much good reason to buy me a such a reinforced belt? Share this post Link to post Share on other sites
953 nut 55,885 #5 Posted February 2, 2017 The 4L-880 and the A-86 are the same size belt, I included both listings as I wasn't sure what type listing you would use in the Netherlands. I have been running conventional belts for ten or more years with no problems and would select the SKF if it were me. Share this post Link to post Share on other sites
