Breednuts 2 #1 Posted January 24, 2017 (edited) I recently acquired a 7-1252 36" tiller for my c-165, and frankly, I'm a bit lost. The picture of the tiller shows everything I have for it. I don't have any of the lifting attachments, none of the front end pulleys, and none of the mounting brackets. As of now, I have downloaded the parts diagram and removed my hitch. Now, however, I'm a bit stuck. From what I have seen, the mounting brackets bolt onto the axle, and the pulleys mount directly beneath the drive pulley. My questions are: where can I purchase these things, can I get some good pictures of the brackets and such for fabrication, and what size drive belt will I need? I should have no trouble fabbing the parts if I can get a good look at them and some measurements. Thanks in advance for the help Edited January 24, 2017 by Breednuts 1 Share this post Link to post Share on other sites
JAinVA 4,619 #2 Posted January 24, 2017 Breednuts, A vender here ,Wheelhorseman1000,has everything you need to mount your tiller.He has new first quality parts.I and many here have bought from him.Just scroll down to the vender section and check out all he has to offer.Quite a selection of hard to find parts.JAinVA 2 Share this post Link to post Share on other sites
Breednuts 2 #3 Posted January 24, 2017 Thanks, I'll check him out 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,490 #4 Posted January 24, 2017 Love those black hood 's!!! Share this post Link to post Share on other sites
