lynnmor 7,285 #1 Posted January 22, 2017 (edited) Just saw this advertised, see photos in a post below. I thought that a member might want the crazy thing. Edited January 22, 2017 by lynnmor Removed link 5 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,278 #2 Posted January 22, 2017 All I can say is "what the what ". Danger Will Robinson Danger. 3 Share this post Link to post Share on other sites
AMC RULES 37,117 #3 Posted January 22, 2017 Just so you know... see "linking to other sites" here. http://www.wheelhorseforum.com/guidelines/ 4 Share this post Link to post Share on other sites
953 nut 54,845 #4 Posted January 22, 2017 I would have to check, but I doubt that OSHA has any regulations on how high you should be able to lift a log prior to encountering an un-shielded buzz saw! However, the fact that you would be doing so while stepping over a snow blade might make this a questionable practice. I guess the hard hat strapped to the front is an attempt at safety! 3 Share this post Link to post Share on other sites
SylvanLakeWH 25,381 #5 Posted January 22, 2017 My C-105 is very jealous of its cousin...That blade is awesome. Just think of all the OSHA violations... 2 Share this post Link to post Share on other sites
Jerry77 1,218 #6 Posted January 22, 2017 I guess I can die now, there is nothing else to see.......my oh my 4 Share this post Link to post Share on other sites
SylvanLakeWH 25,381 #7 Posted January 22, 2017 6 minutes ago, Jerry77 said: I guess I can die now, there is nothing else to see.......my oh my Buy this C-105 and use the blade...I'm guessing you'd get your wish!!! 5 Share this post Link to post Share on other sites
JAinVA 4,619 #8 Posted January 22, 2017 (edited) No thanks I think I will stick to my bowsaws.At least with them I wont bump my shins on that blade.Ouch! Edited January 22, 2017 by JAinVA 2 Share this post Link to post Share on other sites
rlrnot 39 #9 Posted January 22, 2017 When I was a kid, I remember my father had a buzsaw similar to that one mounted on the front of our Farmall. 1 Share this post Link to post Share on other sites
Hacksawhero123 351 #10 Posted January 22, 2017 I've done some things that a safety minded person might describe as "sketchy" or damn stupid. But I can honestly say that I wouldn't try to use that thing on a dare. Mark. 4 Share this post Link to post Share on other sites
953 nut 54,845 #11 Posted January 22, 2017 9 hours ago, SylvanLakeWH said: I'm guessing you'd get your wish! That is just plane wrong; but funny! 1 Share this post Link to post Share on other sites
TravelinJavelin 620 #12 Posted January 22, 2017 well not a fan of ocha at all but that looks a little scary to me! 2 Share this post Link to post Share on other sites
briankd 817 #13 Posted January 22, 2017 9 hours ago, rlrnot said: When I was a kid, I remember my father had a buzsaw similar to that one mounted on the front of our Farmall. yea same here my dad had one mounted to an farmall H. no guards at all on it . remember spent many Saturdays help him cut wood with it. couldn't hear afterwards ears would be ringing. 1 Share this post Link to post Share on other sites
Texas Todd 1,025 #14 Posted January 22, 2017 Things that make you say: Whiskey Tango Foxtrot! 3 Share this post Link to post Share on other sites
pfrederi 17,580 #15 Posted January 22, 2017 Widely used on various farm tractors back in the day (when it was personal responsibility that protected you not OSHA). still see them at auctions 3 Share this post Link to post Share on other sites
Lee1977 6,604 #16 Posted January 22, 2017 (edited) You don't have to step over the blade. It should have a board on the back of the carriage. The carriage swings forward to load the wood. He has it tied back with a tie strap. It's for cutting up limbs you just slide them out on the tray and swing the carriage into the blade. You don't have to be with in a foot of the blade holding the limb. They were common around here 60 years ago. They were for limbs that could easily be carried to the saw. Edited January 22, 2017 by Lee1977 2 Share this post Link to post Share on other sites
DennisThornton 4,769 #17 Posted January 22, 2017 Oh, maybe it's for trimming low hanging branches! 😃 2 Share this post Link to post Share on other sites
rokon 64 #18 Posted January 22, 2017 I have seen them on economy-jim dandy tractors before 5 Share this post Link to post Share on other sites
