Jump to content
Joebag

Recommended Posts

Joebag    17

Joebag
Posted

How can I convert the brinly plow to fit in my 876 slot hitch without buying a Clevis hitch. I do not have a welder nor do I know of anyone that does. Also how to make a coulter wheel so as to help guide the plow. I have it hooked up this way before now it does so so.

20170103_111951.jpg

Share this post

Link to post
Share on other sites
 

WVHillbilly520H    10,373

WVHillbilly520H
Posted (edited)

Brinly.com , still sells parts for these plows such as the coulter wheel and "U" clamp that holds it to the frame, now the slot hitch part that bolts in place of the clevis three hole other guys on here may be able to help you there whether having one for sale or ways to make it yourself, or our vendors section "wheelhorseman 1000" slot hitch to clevis hitch adapter,Jeff.

Screenshot_2017-01-03-20-23-28.png

Edited by WVHillbilly520H
  • Like 11

Share this post

Link to post
Share on other sites
 

Joebag    17

Joebag
Posted

Thnx jeff

  • Like 1

Share this post

Link to post
Share on other sites
 

R. L. Addison    299

R. L. Addison
Posted (edited)

Brinley sold an adapter (HH180 I think) to do just that. I do not think I have any info, but  maybe one of the older-timers on here could help you out. I could give you a picture if that would help. Found what I thought was gone forever. Right #

DSC01723.JPG

Edited by R. L. Addison
  • Excellent 1

Share this post

Link to post
Share on other sites
 

Tankman    3,518

Tankman
Posted

Think front weights! I've had my Stallion's nose up in the air a few times until I added weight up front. :handgestures-thumbupright:

Share this post

Link to post
Share on other sites
 

brandonozz    168

brandonozz
Posted (edited)

Joebag,

You can add the Coulter wheel but it won't really keep the plow straight.  It's just designed to cut the sod.  The slide on the bottom of the plow will keep it straight if you get it adjusted properly and down in the ground.

Edited by brandonozz

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Redtickuleez
      My New d180/wife upsetter
      By Redtickuleez
      Hello gentlemen!!! I recently bought a d180 with loader and backhoe. Im looking for serial number.. there is a plate under the steering wheel but its been pajnted over and i can make it out. Can y'all tell me another location and was this tractor pruchased originally with these attachments and any info would be greatly appreciated... Thanks fellow Wheel Horse enthusiasts !!! !! !!!
    • Aaron Coffman
      "Pond" Wheel Horse Walk Behind
      By Aaron Coffman
      Hi Red Square Community,
       
      I am looking into purchasing the below pictured "POND" Walk Away. The unit itself has the cast in “POND” on the chain reduction housing. The two main things I am looking to learn are what value is typical for these to sell for. This one has a Briggs & Stratton model “N” engine. It runs and drives, but the throttle linkage needs some adjusting. It comes with a cultivator and plow implement. 
       
      Secondly, I was wondering if there is any way to determine what year specifically this Pond is from. The seller believes late 1940s and not 1950s. I am new to these machines, so I am looking for some guidance. Thank you in advance! 
       

    • Joe Reese
      Snow Blower
      By Joe Reese
      Wheelhorse Snow blower Fits c100's 500's etc. with a front mule setup. Works. Comes with lift Flag & Lift spring relief. Also have a set of rear tire chains for additional - $50
      Have a set of custom exctra heavy rear wheel weights if interested as well. $75
      Snow Blower Only, Tractor Not For Sale.



    • 87 416-8 horse
      Wanted wheel horses
      By 87 416-8 horse
      I’m looking for wheel horse tractors for sale or for parts in the Eastern Nebraska or western Iowa area. Preferably 8 speed manuals. Pm me or comment with what you have. The worst I could say is it’s out of my price or distance range. Edit: engine is not important, it’s going to get an engine swap.
      Thanks,
      John
    • ohiofarmer
      Tractor prices have been heading lower
      By ohiofarmer
      i know that there is ebb and flow with market conditions, but I have been seeing bargain 520 and c-160 prices more common. I recently saw a c-160 like model on a place other than here that was close by, but i did not get a chance to see it as I was still on a medical tether getting care. i say c-i60 like model because it was a series of numbers like 4455 or somesuch .Tractor had the k series engine clearly a sixteen HP and came with a decent looking deck and pusher blade. i called my buddy Jay and told him for the $250 ask , he better hustle after it. i really do not know if he did.
        I also have been seeing 520s and such lower than I can remember as well as the D series..My theory is that people experiencing paycheck to paycheck living are increasing in number.
      You even are seeing a lot more older trucks like square bodies and especially big blocks than you did before. we used to see this a lot in new trucks when fuel prices hit records.
      i am not claiming expert status on this, but it seems to be trending this way one county next to indiana and 90 miles North of the Ohio River.
       Tell me what you are seeing out there and what you think. 
           Edit:  Jay and I ran up to buy Bob Ellison's tractor in MI.  Bob was very nice to deal with and included his "last seat"   I got super lucky buying my first C-160 that did not start and another one shortly dropped in to keep it company. The tractor described above was listed for only two days and was gone
×
×
  • Create New...