Jump to content
Horse Newbie

Flywheel nut/ bolt Onan 20hp 1994

By Horse Newbie, in Engines

Recommended Posts

Horse Newbie    7,151

Horse Newbie
Posted (edited)

Which way do you loosen the flywheel nut/ bolt 20 hp Onan 1994 ?

Edited by Horse Newbie

Share this post

Link to post
Share on other sites
 

boomers_influence    106

boomers_influence
Posted

horse newbie

righty tighty, lefty loosey.

thank you. boomer ( the used onan engine parts guy,

also NOS and new )

Share this post

Link to post
Share on other sites
 

Horse Newbie    7,151

Horse Newbie
Posted

Thanks boomer...thought it was lefty loosely. Just wanted to make sure. I just bought my 520 H and am partially disassembling her for a good cleaning and some long overdue maintenance.

Hey, what's that little dohickey called that the fuel line goes to that is screwed to the engine cover? Then through the filter to carb.

Share this post

Link to post
Share on other sites
 

pfrederi    17,930

pfrederi
Posted

I am not an Onan guy but sounds like the fuel pump. Should be 3 hoses on it

Share this post

Link to post
Share on other sites
 

HokieAg07    129

HokieAg07
Posted

Fuel pump, hose off the back, through the tin, goes to to crankcase for engine vacuum to drive the pump. 

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • BuffaloD200
      HELP! D-Series Clutch
      By BuffaloD200
      '74 D-180
       
      My friction disc in gone on my clutch.  I saw the old post about making a new friction disc, so I'm not concerned about that.
      I managed to remove the front clutch plate and double v-belt pulley.  But I can't separate the two.  When I took the assembly off the spiraloc washer popped off on its own.  I HAVE READ THE MANUALS.
      So I should be able to just remove the pulley from the front clutch and continue with step 4.  The v-belt pulley is loose as all hell and flops around like a dead fish.  It seems to be hung up on a ring or bearing race.  
      So my thoughts are grab a BFH or sparky the blue tip wrench.
      Is there an unpublished step 3.5, or some trick?
    • robertsonchris06@gmail.co
      8-25 Riding mower belts
      By robertsonchris06@gmail.co
      After using my 8-25 mower successfully for several years I noticed the belts were very worn. I replaced the belts and used the mower several mowings this past summer with no problems until as I was mowing the last time the mower would not move in any gear. After stopping and inspecting the traction belt it was almost completely destroyed. Prior to this I had noticed that the engage/disengage lever was getting hard to activate (very stiff). Has anyone had a similar thing happen?
      Thanks in advance for any help on this problem.
      Just want to keep my mower running.
      Chris
    • MachXXII
      1988 252-H Wheels
      By MachXXII
      I’m trying to restore my grandfathers old 252-H to use around my property. The tires are shot and the rims aren’t too far behind. Anyone have any recommendations for rims and tires that would fit well on it? 
       
      right now it has 22 x 7.50 - 12 on the back and 15 x 6 - 6 on the front.
    • 87buickt
      Snow thrower help
      By 87buickt
      Newb here, recently purchased a b310 that now runs with snow thrower, plow, and mower deck for what I believe to be a good deal for $200. My question to all y’all gurus is what am I missing for my snow thrower attachment? I’d like to get it squared away before winter I know I’m going to need a belt and chain any help would be greatly appreciated. 



    • Redcube
      How do Identify my tractor
      By Redcube
      I need help Identifying my wheelhorse tractor model number 105109 I don't know how to read it
×
×
  • Create New...