oliver2-44 9,874 #1 Posted October 15, 2016 My 1st grandson Jeremy checking my 312-8 out I think Jeremy was saying.....Hey Gramps get this thing out of the shop and moving My son and Jermey out for his 1st WH tractor ride! He started crying when we took him off, so it was back on for a few more laps. Yes he's going to be grandpa's tractor boy! Picked up a NOS mid-mount grade blade and rear mount recently. It had a few rusty scratches, but had what appeared to be a waxy/oily shipping coating all over it. Grader is mounted in the above picture. I was amazed at how well it worked. As others have said, using the manual lift really lets you vary up and down pressure. Question - When I pull the handle to angle the blade, the handle hits the very corner of my 312-8 rear fender (with the blade in the raised position) Is this common, Could I have something mounted wrong (I have the rear mounts centered) or do I just need to bend the handle a little? No wear on the factory paint on the bottom of the blade. But we put it to work and broke it in. Quite a handy attachment. Now I need some more areas to grade! 15 Share this post Link to post Share on other sites
jellyghost 378 #2 Posted October 15, 2016 Great photos! What year did that have the American flag graphic on the Wheel Horse? I have been wanting a grader blade. I have been wondering how much more effective it would be leveling new dirt than my dozer blade. Share this post Link to post Share on other sites
AMC RULES 37,134 #3 Posted October 15, 2016 http://www.redoyourhorse.com/patriotic-decal-set-for-all-300-400-series-wheel-horse-tractors/ Share this post Link to post Share on other sites
DougC 2,641 #4 Posted October 15, 2016 Won't be long before that young man will be borrowing that machine to grade his own property. Share this post Link to post Share on other sites
oliver2-44 9,874 #5 Posted October 15, 2016 (edited) @jellyghost My 312 is a 1985 which should have the maroon graphic to be technically scorrect. However I just liked Terry's American Series so I went with it. I got lots of complements about them at the Temple tractor show recently. I've only used the blade a little, and it depends on the hardness of what your trying to level. Bur if you have a little dirt to roll around it can really slick an area off. Edited October 15, 2016 by oliver2-44 Share this post Link to post Share on other sites
DennisThornton 4,769 #6 Posted October 15, 2016 I've been hunting for a mid-mount blade for almost 2 years and I find a near infant driving around with one! 1 Share this post Link to post Share on other sites
oliver2-44 9,874 #7 Posted October 16, 2016 I hoping this grandson card helps put a few more things in my shed. If that infant could talk@DennisThornton I think he'd be singing Nanny Nanny Boo Boo You'd better sharpen those search skills especially considering your in the abundant WH state of New York. Of course I could also be very very lucky. as my co-worker likes to say ....."Even a blind hog finds an apple every now and then". 1 Share this post Link to post Share on other sites
SylvanLakeWH 25,979 #8 Posted October 16, 2016 11 hours ago, oliver2-44 said: My 1st grandson Jeremy checking my 312-8 out NAH...What he was really saying was: "Hey Gramps, I really prefer the early 80's Black Hoods...How about one of them for my Birthday?" Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,497 #9 Posted October 16, 2016 Delightfull, thanks for sharing. Glenn Share this post Link to post Share on other sites
Tankman 3,518 #10 Posted October 19, 2016 Infecting the youngster with Wheel Horse Addiction (WHA) early. Way to go! Share this post Link to post Share on other sites
