c-160 blades/plows

[Drock 0]

what plows/blades fit the c-160, ive been told that almost all plows are interchangeable?

[Racinbob 11,040]

You just have to make sure it's for a long frame.

 

[Bert 760]

Most will fit from the long frame tractors, they include raiders chargers broncos the early B series of course the C's 300 400 and 500 series.

[gwest_ca-(File Mod) 11,032]

4 minutes ago, Bert said:

Most will fit from the long frame tractors, they include raiders chargers broncos the early B series of course the C's 300 400 and 500 series.

And these won't fit unless you get the rear axle quick-hitch brackets with it. They often get separated along with the lift link.

 

Garry

[daveoman1966 3,745]

here is a long frame, and a short frame....  get the long frame with either a 42 or 48" blade.

The axle bracket for the C-160 is also shown.

[KC9KAS 4,741]

@Drock  

[Tankman 3,518]

9 hours ago, gwest_ca said:

And these won't fit unless you get the rear axle quick-hitch brackets with it. They often get separated along with the lift link.

 

Garry

I might add chains and wheel weights for pushing the white, wet, cold junque! 

 

[roadapples 6,983]

         

[857 horse 2,581]

I have a long frame plow on my short frame....works really well....with weights...and yes chains....

 

But ,,on another note....if you were to scroll back about 4 or 5 ...i can now see where my roll of duct tape went,,,

 

Dave O Man saw what i did ,,,,,,,,,keeps all the linkage rods on the blade during summer storage......

 

by the way......i stopped this weekend and got a 4 ft piece of steel to make a new edge for this winter,,,Its an Ice Jungle out there !!!!!!!!!!!!!!