Jump to content
Detector

Photo needed of 1990 312-H or 416-H brake pedal

Recommended Posts

Detector

Looking at partstree I'm missing a spacer and washer behind my lift cylinder that is mounted on the same shaft as the brake pedal and I'm not sure if the brake pedal spacer I have  "Toro 107691" is correct, cannot find a photo of it. I have nothing behind my cylinder. Any pic would be appreciated 

Share this post


Link to post
Share on other sites
 
rmaynard

I don't know if this will help you, but here are some pictures of my '96 416-H brake pedal/lift cylinder setup. This is the only way I could install the hardware to keep things lined up and not rub.

 

From outside to frame, in that order:

 

IMG_20160912_163850204.jpg

 

IMG_20160912_163855458.jpg

 

IMG_20160912_163904320.jpg

 

Edited by rmaynard

Share this post


Link to post
Share on other sites
 
Detector

Yes very helpful & Thank you for taking the time to take the pics!! Everything on mine lined up fine prior to dissambly and I see no wear on the cylinder closest to the frame so I may roll with it like it was prior to disassembly. 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...