muz123 1,191 #1 Posted September 10, 2016 I had this bumper last year on my 1993 520-H and it fitted perfectly. Can anyone tell me why it won't fit on my 1996 520-H? Is it because the engine plate is to wide? Thanks, Dave Share this post Link to post Share on other sites
Walt 339 #2 Posted September 10, 2016 There have been 50+ views of your post with no response and I to do not have an answer for you. But maybe a picture of the bumper your inquiring about may help get you the info you need. Share this post Link to post Share on other sites
CTBT&D 77 #3 Posted September 11, 2016 If you're talking about the anti-sway bumper bracket, I have 1995 520, with the same problem. The belt guard bracket fit fine but the bumper bracket doesn't fit around the engine plate. I installed the two stage for the 2010-11 season and have been running it since without any issues. The photos are the two pieces I mentioned. Craig 2 Share this post Link to post Share on other sites
muz123 1,191 #4 Posted September 11, 2016 (edited) 3 hours ago, CTBT&D said: If you're talking about the anti-sway bumper bracket, I have 1995 520, with the same problem. The belt guard bracket fit fine but the bumper bracket doesn't fit around the engine plate. I installed the two stage for the 2010-11 season and have been running it since without any issues. The photos are the two pieces I mentioned. Craig Yes that's exactly what I meant! So if that's the case then I won't use the bumper. Thanks, Dave Edited September 11, 2016 by muz123 Share this post Link to post Share on other sites
Forest Road 594 #5 Posted September 12, 2016 Mine has been under the workbench for the last 3 years. Share this post Link to post Share on other sites
