meadowfield 2,570 #1 Posted August 25, 2016 (edited) We had our 5th meet again at newby Hall nr Ripon, been a bit late posting pics.... Edited August 25, 2016 by meadowfield 13 2 Share this post Link to post Share on other sites
ACman 7,618 #2 Posted August 25, 2016 (edited) Thanks for sharing your ! Looks like you had a good showing of Horses . Edited August 25, 2016 by ACman 2 Share this post Link to post Share on other sites
953 nut 55,198 #3 Posted August 25, 2016 I always love to see the works of art you have in England, true craftsmanship. 3 Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,496 #4 Posted August 25, 2016 Was that Cub Cadet a 100 or a 70? It's neat seeing the various vehicles, trucks,etc., over there that we don't get to see here in the US. Thanks for sharing the pictures. They were great. 3 Share this post Link to post Share on other sites
meadowfield 2,570 #5 Posted August 26, 2016 14 hours ago, T-Mo said: Was that Cub Cadet a 100 or a 70? Yes it's my son Ewan's cc70, pretty rare here. Unfortunately he turned to the yellow side 18 months ago... 7 1 Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,496 #6 Posted August 26, 2016 3 hours ago, meadowfield said: Yes it's my son Ewan's cc70, pretty rare here. Unfortunately he turned to the yellow side 18 months ago... Nothing wrong with turning to the yellow side, but the CCs are a bit more complicated. That 70 is sweet, btw. Great looking tractor. The 70 and 100 have that look about them, and they replaced the Cub Cadet Original and "fixed" the short comings the Original had, mainly eliminating the belt and drive pulley in the drive train and going to a full drive shaft configuration. IH did this by flipping over the frame allowing the engine to sit lower therefore aligning it with the transmission. The Original had the frame like the Wheel Horses did, with the angle down therefore the engine sat on top of the frame. This meant the engine was too high to be inline with the transmission, so IH dropped a belt down to a pulley and attached the pulley to the driveshaft. The 70 and 100 had the frame flipped up so the engine sat in between the angle iron lowering the engine inline to the transmission. 3 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,297 #7 Posted September 22, 2016 @meadowfield I a bit late with a comment , thanks so much for sharing pictures . I really like the crawler. You chaps like to engineer so great and unusual tractors. 1 Share this post Link to post Share on other sites
neil 2,409 #8 Posted September 25, 2016 Hope to make the show next year nice pics Mark 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,497 #9 Posted October 24, 2016 Very proper show, thanks for sharing the pics. Glenn Share this post Link to post Share on other sites
paulmackellow 25 #10 Posted November 20, 2016 It will be our 4th Newby Hall next year, just to keep Mark happy I will take some Wheelhorses this time !! 1 Share this post Link to post Share on other sites
meadowfield 2,570 #11 Posted November 21, 2016 I might not let you in Share this post Link to post Share on other sites
paulmackellow 25 #12 Posted November 21, 2016 Allan will Share this post Link to post Share on other sites
meadowfield 2,570 #13 Posted November 22, 2016 14 hours ago, paulmackellow said: Allan will damn rumbled! Share this post Link to post Share on other sites
paulmackellow 25 #14 Posted November 22, 2016 (edited) Unless you don't want them of course, in that case I'll bring some yellow and white tractors to keep Ewans company Edited November 22, 2016 by paulmackellow 1 Share this post Link to post Share on other sites
Stormin 9,981 #15 Posted November 22, 2016 I'll be taking one red, one black and Chris is delivering the silver one. Share this post Link to post Share on other sites
chris sutton 610 #16 Posted November 22, 2016 38 minutes ago, Stormin said: I'll be taking one red, one black and Chris is delivering the silver one. That's good of him, 3 Share this post Link to post Share on other sites
paulmackellow 25 #17 Posted November 24, 2016 So that's a Roper, Cub Cadet and Westwood going to Yorkshire then Chris ?? Share this post Link to post Share on other sites
DennisThornton 4,769 #18 Posted November 24, 2016 I didn't see anything that I didn't want! And some I want a lot! Awesome MODs! Share this post Link to post Share on other sites