Jump to content
wwww12345

416-8 info?

Recommended Posts

wwww12345

Hey all, I have found a wheel horse 416-8 for sale. I was wondering what you all could tell me about them in general. I am mainly looking to turn this into a pulling tractor, would this be a good one to do so with? If not, what would you recommend?  Also could you tell me what you know about the engine, it has a Koehler 341S one cylinder engine. Many thanks!!!!!

image.jpg

image.jpg

image.jpg

  • Like 2

Share this post


Link to post
Share on other sites
 
can whlvr

in my opinion that is one of the best wheelhorses ever made,single 16 horse kohler,and the stout 400 series tractor with the 8 pinion 1 1/8 axles,it would make a great puller

  • Like 1

Share this post


Link to post
Share on other sites
 
Tankman

416-8? Great Horse! Total agreement with can whlvr. 

Share this post


Link to post
Share on other sites
 
T-Mo

Having the K-341 in it, makes it a 1985 or 1986.  Starting in 1987 the 416-8 had a Kohler M16S Magnum in them, as does my 1988 416-8.  The mid to late 80s Wheel Horses were considered the maroon striped Wheel Horses due to the maroon decal striping on the hood.

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Redtickuleez
      By Redtickuleez
      Hello gentlemen!!! I recently bought a d180 with loader and backhoe. Im looking for serial number.. there is a plate under the steering wheel but its been pajnted over and i can make it out. Can y'all tell me another location and was this tractor pruchased originally with these attachments and any info would be greatly appreciated... Thanks fellow Wheel Horse enthusiasts !!! !! !!!
    • Aaron Coffman
      By Aaron Coffman
      Hi Red Square Community,
       
      I am looking into purchasing the below pictured "POND" Walk Away. The unit itself has the cast in “POND” on the chain reduction housing. The two main things I am looking to learn are what value is typical for these to sell for. This one has a Briggs & Stratton model “N” engine. It runs and drives, but the throttle linkage needs some adjusting. It comes with a cultivator and plow implement. 
       
      Secondly, I was wondering if there is any way to determine what year specifically this Pond is from. The seller believes late 1940s and not 1950s. I am new to these machines, so I am looking for some guidance. Thank you in advance! 
       

    • Joe Reese
      By Joe Reese
      Wheelhorse Snow blower Fits c100's 500's etc. with a front mule setup. Works. Comes with lift Flag & Lift spring relief. Also have a set of rear tire chains for additional - $50
      Have a set of custom exctra heavy rear wheel weights if interested as well. $75
      Snow Blower Only, Tractor Not For Sale.



    • 87 416-8 horse
      By 87 416-8 horse
      I’m looking for wheel horse tractors for sale or for parts in the Eastern Nebraska or western Iowa area. Preferably 8 speed manuals. Pm me or comment with what you have. The worst I could say is it’s out of my price or distance range. Edit: engine is not important, it’s going to get an engine swap.
      Thanks,
      John
    • Rob R
      By Rob R
      Afternoon gentlemen friend of mine's father passed after a long illness, and he is now the owner of his Wheel Horse 416-8 with the Onan P216.  He wants to sell it to me as he has other tractors. I never owned and Onan Machine what advice can you give me. It has been in storage for 5 years and of course according to him "ran when parked" Has 365 hours on it. Thanks in advance going to look at it this Wednesday.  
×
×
  • Create New...