Jump to content
Old red

Plow

Recommended Posts

Old red

I have a co-worker with a plow he used on an early 90's wheel horse. He's gonna throw it out. Does anyone know if something like that would mount up to my 854 with little fabrication, or is it way off the mark. I havnt seen it yet.

Share this post


Link to post
Share on other sites
 
Achto
10 hours ago, Old red said:

Does anyone know if something like that would mount up to my 854 with little fabrication, or is it way off the mark. I havnt seen it yet.

Should be able to make any thing fit with three simple tools - torch, welder, & a hammer. :D  May take some fab work but I have seen many implements retro fitted.

Share this post


Link to post
Share on other sites
 
stevasaurus

Are you talking about a snow blade?   :think:  I hate to type a bunch of stuff for a snow blade and find out you are talking about a garden plow.  :unsure:

Share this post


Link to post
Share on other sites
 
squonk

If it's a garden plow, a slot or Brinly rear hitch for it will work on the 854 with minor work. If it's a snow plow, It will be a long frame plow. Your tractor is a short frame. Most long frame plows have the extra holes in the frame to move the rear bar forward to make it fit a short frame tractor. Again it will work with some tinkering.:banana-wrench:

Edited by squonk
  • Like 1

Share this post


Link to post
Share on other sites
 
wallfish

Here's a pic of a snow plow frame

Notice the holes for changing the mounting bar for short frame and long frame tractors.

Nothing wrong with a little fabrication on them either! :lol:

bk1 frame holes.jpg

  • Like 4

Share this post


Link to post
Share on other sites
 
Tankman

wallfish, amazing art work! :handgestures-thumbupright:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • dlashb40
      By dlashb40
      As a retired 61-year-old who inherited 4 of my Grandfather's Wheel Horse tractors, I found a valuable resource in this forum. Here, I connected with Bob Parks (Racinbob), who at the time lived nearby and kindly agreed to help me identify all of them. I ended up keeping the 1964 Model 854 and sold the others. The 854 is a solid, primarily original tractor, and I've been using it since I was 6-years-old. I also had the RM-364 mower deck attachment, which had not been on the tractor for many years. Once again, this forum proved its worth as I could identify and obtain some attachment parts that I was missing. Last week, after some adjustments, I put the mower deck to use and mowed nearly an acre of grass without any issues. The sense of accomplishment in identifying and restoring the equipment was truly inspiring, and I felt like I was a kid again. 
       
      As someone who doesn't consider themselves 'mechanically inclined,' I've grown and learned much through this project. I want to express my heartfelt thanks to all of those who guided me and showed me that with the right support, even the most daunting tasks can be tackled.  

    • Bodean
      By Bodean
      In search of bottom plate for 854 two pieces tank mine is cracked will take whole tank if one is available i have a replacement gasket already thanks

    • Bodean
      By Bodean
      Slow but sure turning the corner get big red back together waiting on transmission seals 

    • rustyedge1
      By rustyedge1
      These belts have been hanging in my garage since last used I believe there off a 754 I used to have. Bought them new and didn't use much.
      Don't know why I took them off. Some fraying on top in a few places from use, also don't know why but selling as is and photo'd. 20.00 shipped if you can use them.
      PM for PayPal info or questions. 16" ID approx.
       




    • Jennifer
      By Jennifer
      Okay friends husband and I brought home another mutilated mutation that I felt sorry for and wanted to fix….  Questions will it run??  Lol… what model for sure?  So I believe it’s an 854 and would like feed back to confirm..  lots of stuff coming off… has the k181s tag on the engine!  Two piece gas tank!  So if my friends on here would agree or disagree I would be able to see how much I have been learning over the years!  











×
×
  • Create New...