Mower Blades

[Aaron's Wheelhorse 0]

I just recently got this Whellhorse 211-5 and it not mowing the grass that well. I jacked it up yesterday and a whole blade and washer and nut is missing. it has 3 mower blade heads 

 

I cant find a part number at all the only number i can visabilly see is the part number on the mower deck  wheel horse 0542SB02 46003

 

The two blades thet i took off are so worn out and the mesurement i get out of them is 13 1\2 inches

.

I found some online for $9.99 a peice they are 13 and 7\8 inches

Would these work on this mower?

 

Thanks in Adavance

Regards,

Aaron

[gwest_ca-(File Mod) 11,032]

Original blades 106077 replaced by Toro 3-blade set 106636 (3/4" round hole)

Napa 3 of 7-04533

 

Garry

[KC9KAS 4,741]

@Aaron's Wheelhorse 

 

I thought at 1 time I was told that mower blades were measured "diagonally" from the sharp corner on 1 end to the sharp corner on the other side.