Ed Kennell 37,487 #1 Posted July 16, 2016 I didn't come home with any tractors today, but I didn't let them go for cheap. I bid them all to $4-500 and let em go. I did come home with a lot of old and new Kohler and WH parts and this cart jumped on my truck. I still have a parts blower and a Raider 10 chassis to pick up when my trailer is returned from a loan. 20 Share this post Link to post Share on other sites
KC9KAS 4,741 #2 Posted July 16, 2016 Nice haul...and hauler! 4 Share this post Link to post Share on other sites
elliot ness 1,916 #3 Posted July 16, 2016 Looks like you did real good. 3 Share this post Link to post Share on other sites
AMC RULES 37,102 #4 Posted July 16, 2016 No tractors... but, enough parts to make a few. 5 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,497 #5 Posted July 16, 2016 What a score, you needed the cart to haul that pile of gold. Glenn 4 Share this post Link to post Share on other sites
russellmc301 600 #6 Posted July 17, 2016 thats awesome all the parts any suburban parts? 4 Share this post Link to post Share on other sites
SPINJIM 1,981 #7 Posted July 17, 2016 Great haul Ed. I saw that one advertised, but couldn't make it because my sister was visiting from Florida, and I haven't seen her in 6 years. Would have been in trouble with my wife and the whole family if I had gone to the auction. Had that auction on my calendar until a few days ago. Glad to kept the price of the three tractors high. It helps the value of ours. Jim 1 Share this post Link to post Share on other sites
Ed Kennell 37,487 #8 Posted July 17, 2016 No burb parts Russell. Most of the tins are for a Raider and a lot of the new engine parts are for a 17HP Kohler twin. He had a Raider partially restored and several parts tractors. The three running tractors sold were a C-175 twin w/ short chute ss blower, a 417 w/42" sd deck , and a C-120 with a transplanted 14 Kohler on a rocker plate w/ a 42" sd deck. Both the 17s had receipts for complete engine overhauls in 2009. They all sold for $450-$575. I really didn't need or want any of the tractors Jim, but no other RS members were there, so I pushed the bidders pretty high. I was going to buy the C-120 until I saw the 14 rocker engine. 5 Share this post Link to post Share on other sites
TDF5G 2,069 #9 Posted July 19, 2016 Looks like the mother load! 1 Share this post Link to post Share on other sites
ericj 1,578 #10 Posted July 20, 2016 Ed, I had that auction on my radar to, but unfortinatly other things took priority and I didn't get to go. I'm glad you made a good hual and the tractors didn't go for scrap prices eric j 1 Share this post Link to post Share on other sites
Ed Kennell 37,487 #11 Posted July 20, 2016 Hey Eric, I was expecting to see you there. I could have used some help on the bidding. But I didn't let em sell for scrap. Share this post Link to post Share on other sites
stevasaurus 22,527 #12 Posted July 20, 2016 (edited) Nice Ed...what are all of those 6203 bearings. Can I see one out of the box?? Edited July 20, 2016 by stevasaurus Share this post Link to post Share on other sites
Ed Kennell 37,487 #13 Posted July 20, 2016 Here ya go Steve. single row deep groove ball bearings w/ steel cage and double sided steel seals 40mm OD x 17 mm ID x 12mm thick. Made in Germany....not China. 1 Share this post Link to post Share on other sites
Ed Kennell 37,487 #14 Posted July 20, 2016 Not all , but here is todays auction goodies. 4 Share this post Link to post Share on other sites
russellmc301 600 #15 Posted July 20, 2016 where are these wheel hors auctions at? i need to go to them 2 Share this post Link to post Share on other sites
Wheel-N-It 2,968 #16 Posted July 21, 2016 2 hours ago, russellmc301 said: where are these wheel hors auctions at? i need to go to them Part of me is glad I don't know where they are at. 2 Share this post Link to post Share on other sites