Looking for information on Kohler Engine

[JerDecker63 0]

I recently pulled this Wheel Horse out of my Father-In-Law's garage. He said that he picked it up some years ago at a yard sale.  I am interested in getting it running again but as can be seen from the pictures the carb is missing.  I am not having any luck surfing the web trying to figure out where to get parts.  My Father-In-Law said that the engine ran but he pulled the carb for another project and never got back to this one.  If anyone could help point me to a service manual I would greatly appreciate it.

 

 

 

Muffler will be needed once this thing gets fired up!!

[JAinVA 4,619]

JerDecker,

   Carburetors for Kohlers are plentiful and cheap on E-bay.New or used,any horsepower.The muffler may be more of an issue inless you go with an aftermarket unit.Same source.Luck,JAinVa

Edited June 5, 2016 by JAinVA

[953 nut 55,155]

      Pictures didn't open so unsure what Kohler you have. Hope one of these will help.

Kohler 4-72 SM Section 01.1-3.2 General info Lubrication Air intake HR

(1).pdfKohler K241-K341 Owner's Manual Rev. 8-97.pdf

Kohler K91 K161 K181 OM #ENS-593-F HR (1).pdf

[KC9KAS 4,741]

@JerDecker63 Photos did not open for me either.

[JerDecker63 0]

Thanks for the feedback on the photos.  I will try to load them in a different format.

Richard: Based on the links you provided I am guessing that this is a 4 hp engine. ??  I am going to pull the head off and will measure the bore to verify.

3 hours ago, 953 nut said:

      Pictures didn't open so unsure what Kohler you have. Hope one of these will help.

Kohler 4-72 SM Section 01.1-3.2 General info Lubrication Air intake HR

(1).pdfKohler K241-K341 Owner's Manual Rev. 8-97.pdf

Kohler K91 K161 K181 OM #ENS-593-F HR (1).pdf

 

[953 nut 55,155]

 The information tag is missing from your engine, but if you measure the cylinder and the stroke you can determine the size.

Kohler Single Cylinder Engine Specs _ Torque Values and Sequences for Fasteners _ Identification & Torque Settings of Most Commonly Used Grades of Bolts (1).html