V twin engine

[TIGman 2,006]

My foreman says I should put this 18hp

Briggs& Stratton V twin in my 875. 

This is one he is in the process of building up for one of his pulling tractors. 

[953 nut 55,237]

18 HP, that would make it an 1875, I like it!  

[TIGman 2,006]

The way they work when my foreman gets done with the motors I would be pulling wheelie's with the "1875" lol 

[JAinVA 4,619]

TIGman,

        Go for it.Just make sure you have wheelie bars.Years ago I had a Speedex and a good friend  back flipped it.The sight of the steering wheel bouncing off his chest 45 years out still haunts me.Both survived but man what a sight.Luck,JAinVA

[TIGman 2,006]

JAinVA

I think I'm going to leave that engine and wheelie bars to my Foreman. 

I have helped him alot welding up things for his pulling tractors. Like gas tanks, exhaust pipes, etc.

[JAinVA 4,619]

   TIGman,

         The one thing I have not commented on is your welding.Outstanding!!!! I had the honor of working with some talented certified welders over the years.Guys that could weld with mirrors to see their work.I learned a lot from them.Nice to see that pride in working with one's hands still exists.Luck,JAinVA

JimAnderson

Gloucester,Va

Edited June 4, 2016 by JAinVA

[WVHillbilly520H 10,373]

Awesome welding, I play with the Tig basically just butt welding and fair with Mig and stick, never took any real classes, just Vo-AG/FFA and what I can learn in the machine shop at work,and play machinist too all on job training no schooling,Jeff.

[JAinVA 4,619]

Jeff,

   I have seen some of your fabrications and they are very well done.I would be proud to say I did them.That may not count for much but you definitely have my respect Luck,JAinVa

JimAnderson

Gloucester,Va

[WVHillbilly520H 10,373]

Just now, JAinVA said:

Jeff,

   I have seen some of your fabrications and they are very well done.I would be proud to say I did them.That may not count for much but you definitely have my respect Luck,JAinVa

JimAnderson

Gloucester,Va

Thank  you very much sir, we all have our strengths and weaknesses, and we all should be blessed to use what God gave us to the best of our individual or collective abilities just like this forum what 1 doesn't know another can jump in and help out tto get the job done,Jeff.

Just now, JAinVA said:

Jeff,

   I have seen some of your fabrications and they are very well done.I would be proud to say I did them.That may not count for much but you definitely have my respect Luck,JAinVa

JimAnderson

Gloucester,Va

Thank  you very much sir, we all have our strengths and weaknesses, and we all should be blessed to use what God gave us to the best of our individual or collective abilities just like this forum what 1 doesn't know another can jump in and help out tto get the job done,Jeff.

[TIGman 2,006]

7 minutes ago, WVHillbilly520H said:

Awesome welding, I play with the Tig basically just butt welding and fair with Mig and stick, never took any real classes, just Vo-AG/FFA and what I can learn in the machine shop at work,and play machinist too all on job training no schooling,Jeff.

Believe it or not, only school classes were High School and Junior College.

And all they taught you there was Arc and Gas welding. Like you say,the rest was all on the job training. 38 yrs in Tool&Die, 19 of that the Full time welder.  I seem to weld alot of "Government" for people .....lol 

[JAinVA 4,619]

Jeff,

   I agree with your comments but calling me sir is like putting an elevator in an out house,doesnt fit.We are all here to learn and help.I have followed a lot of your posts becauseI I think you have a lot of real world knowledge to share.Luck,JAinVa

JimAnderson

Gloucester,Va 

Edited June 4, 2016 by JAinVA

[WVHillbilly520H 10,373]

2 minutes ago, JAinVA said:

Jeff,

   I agree with your comments but calling me sir is like putting an elevator in an out house,doesnt fit.We are all here to learn and help.I have followed a lot of your posts becauseI I think you have a lot of real world knowledge to share.Luck,JAinVa

JimAnderson

Gloucester,Va 

Jim ,I reckon that's just my "hillbilly" upbringing to try and treat everyone with respect, and my wife tells me she ain't no "Ma'am" either but hey you can take the hillbilly out of the hills just can't take the hills out of the hillbilly ,by the way my first name is "William" but momma never called me by that unless I was doing other than what I should always been "Jeff" or "Jeffrey" as long as I can remember...and my dad is "Jim" or James...Thank you.

[JAinVA 4,619]

TIGman,

   One of the photos you posted  looked like stamping die but it was aluminum.Was it for a composite lay up or was it something else?

[TIGman 2,006]

30 minutes ago, WVHillbilly520H said:

Awesome welding, I play with the Tig basically just butt welding and fair with Mig and stick, never took any real classes, just Vo-AG/FFA and what I can learn in the machine shop at work,and play machinist too all on job training no schooling,Jeff

37 minutes ago, JAinVA said:

   TIGman,

         The one thing I have not commented on is your welding.Outstanding!!!! I had the honor of working with some talented certified welders over the years.Guys that could weld with mirrors to see their work.I learned a lot from them.Nice to see that pride in working with one's hands still exists.Luck,JAinVA

JimAnderson

Gloucester,Va

Thank's for the compliment. 

All I can say is I'm not the best, but I sure do try. 

[WVHillbilly520H 10,373]

11 minutes ago, TIGman said:

Believe it or not, only school classes were High School and Junior College.

And all they taught you there was Arc and Gas welding. Like you say,the rest was all on the job training. 38 yrs in Tool&Die, 19 of that the Full time welder.  I seem to weld alot of "Government" for people .....lol 

Tigman my coworker here has been at the factory for 45 yrs 30 of them Tool&Die maker and Blacksmithing on the side has made 1/4 scale civil war cannons in his home shop so yes it's not all schooling you learn as you go everyday,Jeff.

[JAinVA 4,619]

Jeff,

   I wasn't trying to bust on ya! Most of us who were raised in the country have the same level of respect.I have some really nice next door neighbors but I won't go there unless the husband is home.Just the way I was raised.Country values are in our blood.

[WVHillbilly520H 10,373]

Jim , all's good I appreciate your thoughts/respect on my skills ect,...Tigman good luck with your project/restoration keep us informed/updated and yes you have wicked mad welding skills,Jeff.

[cschannuth 3,816]

An example of Jeff's work...which is obviously much better than my picture uploading ability. 

 

[WVHillbilly520H 10,373]

Craig, shucks man you finished that bumper/weight bracket to make it look that good  I just had a vision then cut milled drilled the steel...,Jeff.

[cschannuth 3,816]

It was well done so it was easy to finish.  Thanks again.