prondzy 3,882 #1 Posted May 18, 2016 I have been searching the forum and cannot find the answer I'm looking for. What is everyone using for gasket material on the pump of their sundstrand transaxle? I know I can buy the gray sheet stuff from any store but, I know it needs to be something less porous that can withstand pressures. I am not asking about the case halves I am looking for the gaskets for the pump Share this post Link to post Share on other sites
daveoman1966 3,762 #2 Posted May 18, 2016 I use the brand name FELPRO for gasket material. Take a small piece of the original gasket to any auto parts store to get the correct thickness. The material is made of strong non-porous material, just like OEM. You MAY be able to buy new gaskets on-line....here they are: 4 Share this post Link to post Share on other sites
prondzy 3,882 #3 Posted May 18, 2016 (edited) You haven't had any gasket issues or leaking? Edited May 18, 2016 by prondzy Share this post Link to post Share on other sites
daveoman1966 3,762 #4 Posted May 18, 2016 not ever. Just be sure to thoroughly clean the mating surfaces. Skim coat with gasket sealant. Share this post Link to post Share on other sites
