prondzy 3,883 #1 Posted May 14, 2016 I was wondering if anyone has found a cheaper alternative to the spindle thrust bearings and washers found in the swept axles. Part numbers 9865 and 9548 I know they can be bought from toro but that's a $65 bill for 4 washers and 2 bearings. Share this post Link to post Share on other sites
cleat 7,030 #2 Posted May 14, 2016 I believe they are the same as any trailer hubs with 1" spindles. Share this post Link to post Share on other sites
MalMac 1,332 #3 Posted May 14, 2016 (edited) Are you talking about the flat washers and thrust bearings on the bottom of the Axel where the spindle/king pin goes through the Axel? If so there is a web site called Classic Kitchens and more. Scroll down menu on left till you make through all the kitchen stuff till you see Wheel Horse. He's got the thrust washers and bearings. Edited May 14, 2016 by MalMac 1 Share this post Link to post Share on other sites
prondzy 3,883 #4 Posted May 14, 2016 Cleat these are not the bearings for the wheels Share this post Link to post Share on other sites
prondzy 3,883 #5 Posted May 14, 2016 Thanks Mal Mac I just ordered a set! Share this post Link to post Share on other sites
Eric Friedrichsen 112 #6 Posted May 14, 2016 I purchased from McMaster-Carr thrust needle roller bearings for the 1" king pin for the following price: 1" bearing--------------------------$3.17ea 1" thrust washer (.032)-----------$1.15ea I mic'd the WH thrust bearing as .064" so I used 4 thrust washers per spindle. Total price for the two spindles was: $15.54 + very reasonable shipping. Eric 3 Share this post Link to post Share on other sites
Tankman 3,520 #7 Posted May 14, 2016 Been using QBC for years, fast and fairly priced. http://qbcbearings.com/BuyRFQ/ThrustB_Bearing_TPS_I.htm# My one and only Onan has the Wheel Horse logo, center of the air screen. Classic Kitchens, excellent! http://classickitchensandmore.com/wheel-horse-tractors-parts-c-42/wheel-horse-lawn-tractor-onan-engine-horse-head-logo-plate-new-p-4090.html 2 Share this post Link to post Share on other sites
Pollack Pete 2,273 #8 Posted May 14, 2016 Good advice.I just replaced these bearings and washers on my latest 520H.I bought them Parts Tree.Ouch.Really took a bite out of my Wallet. 1 Share this post Link to post Share on other sites
lynnmor 7,576 #9 Posted May 14, 2016 4 hours ago, Eric Friedrichsen said: I purchased from McMaster-Carr thrust needle roller bearings for the 1" king pin for the following price: 1" bearing--------------------------$3.17ea 1" thrust washer (.032)-----------$1.15ea I mic'd the WH thrust bearing as .064" so I used 4 thrust washers per spindle. Total price for the two spindles was: $15.54 + very reasonable shipping. Eric That's where I bought mine. Folks, you really need to think outside of the (Toro) box. I used the old thrust washers on top of the spindles to take up space and hopefully reduce the amount of dirt getting down into the axle. 1 Share this post Link to post Share on other sites
cleat 7,030 #10 Posted May 14, 2016 9 hours ago, prondzy said: Cleat these are not the bearings for the wheels Sorry about that, I misread the post. McMaster-Carr seems the way to go. Share this post Link to post Share on other sites
WHX?? 50,777 #11 Posted May 14, 2016 How bizarre. ...retro kitchens & horse parts! Who woulda thunk it? Is this guy a member? 1 Share this post Link to post Share on other sites
TDF5G 2,072 #12 Posted May 16, 2016 On 5/14/2016 at 7:38 AM, WHX61/3 said: How bizarre. ...retro kitchens & horse parts! Who woulda thunk it? Is this guy a member? It seems odd, but these folks must like retro kitchens and . 1 Share this post Link to post Share on other sites
