Ckee 0 #1 Posted April 29, 2016 hello my name is Claude and I have a 1976 d250 I got for 200 bucks with dozer blade and deck it runs great just after getting it I found a new old stock tiller for the rear of a montgomery ward tractor and picked it up for 75 bucks I intend to take the gear box from my mower deck and mount it sideways so I can run the tiller off of my rear pto shaft everything spears to fall right into place and all measurements look good does anyone know of a reason this may not work Share this post Link to post Share on other sites
312Hydro 474 #2 Posted April 29, 2016 I would guess that you just want make sure that the tiller rpms are what you need. Which can be adjusted thru gearing. I'd like to see some pics as you go,sounds like a nice project. Share this post Link to post Share on other sites
Ckee 0 #3 Posted April 29, 2016 Thanks 312 hydro that's just what I wanted to here I will take some pictures tonight and put them up I am using the original pulley on the tiller and the original on the gear box for a first test run and figure I will change the ratio if needed Share this post Link to post Share on other sites
Ckee 0 #4 Posted April 30, 2016 So far I have flipped the original gearbox mounting plate so to give me the larger part where I wish to mount it to the tiller Share this post Link to post Share on other sites
Ckee 0 #5 Posted April 30, 2016 Wouldn't let me upload more pics but gear box is mounted just got to make a trip to Napa in the morning for a belt Share this post Link to post Share on other sites
