cschannuth 3,816 #1 Posted April 20, 2016 I removed all the sheet metal except the hood to inspect and clean my 78 C161. When I put it back together the drive belt seems to jump/flop around when I push in the clutch. And, when I let out the clutch the take off isn't as smooth as before. Also, before I did the clean up, it would roll easily in neutral with the engine not running. Now I can still push it but it takes some effort to make it roll. I assume the side panel that covers the drive pulleys is the culprit but it looks like it is installed correctly. Share this post Link to post Share on other sites
daveoman1966 3,762 #2 Posted April 20, 2016 (edited) There are guides on the back-side of the belt cover to correctly carry the belt. Hope these pics help.Look closely at them as the clearances are close. At least, this the way my C-160 Auto is arranged. Edited April 20, 2016 by daveoman1966 Share this post Link to post Share on other sites
(800x673).jpg.cc3aefcd170c6bab1f22408014a1eb53.thumb.jpg.37c62115dec7a1fc65b8e86afd6af643.jpg)