redone 45 #1 Posted April 18, 2016 This is foolish. I am wanting a muffler clamp to fit my 1980 10 hp kohler engine. The size is 1" x 3/8. Anyone have one? Resonably ok Share this post Link to post Share on other sites
Daddy Don 907 #2 Posted April 19, 2016 Try auto parts store or farm supply store. Share this post Link to post Share on other sites
SylvanLakeWH 27,589 #3 Posted April 19, 2016 I had the same problem - ended up using a 1 1/2" muffler clamp and torqued it down - works like a charm...No leaks - no issues.. Share this post Link to post Share on other sites
squonk 42,579 #4 Posted April 19, 2016 1 3/8" clamps are really used much at least in the auto ind. No parts store that I tried had them. I did find them at Grainger # 33NZ15 Share this post Link to post Share on other sites
grinchsr 642 #5 Posted April 19, 2016 Walker part number 35324. Saw one on auction site and also saw them at Amazon and Rock Auto. I just ordered 3 from Amazon $3.83 Share this post Link to post Share on other sites
redone 45 #7 Posted April 23, 2016 Hey Men.I found my muffler clamp at Napa Auto. For a 1.58. 1 3/8 .pass this one to others. Thank you. I might have to rebuild my 12 kohler, vibrations. Yes I have.check out flywheel and it is very tight. The hood and steering wheel vibrate at low speed.even at a higher speed it shaks. There seems to be a littler knocking noise, but not enough to be worried to further damage. dose this engine have balance counter gears? Share this post Link to post Share on other sites
squonk 42,579 #8 Posted April 23, 2016 So what's the Napa # because my store can't seem to find it? EDIT Napa # 7335324. My store shows 2 in stock. Guess I'll have to go down there and kick some tail! 1 Share this post Link to post Share on other sites
jay bee 912 #9 Posted April 28, 2016 On 4/19/2016 at 0:07 PM, TDF5G said: If you have a Federated Auto Parts Store near you, they have or have access to Part #U114 and that is a 1-1/4 inch clamp with a 5/16 inch U-bolt. In my area I paid $1.35 2 Share this post Link to post Share on other sites
TDF5G 2,072 #10 Posted April 28, 2016 Small town where I live, we have Oreilly and Auto Zone. And I try to avoid Auto Zone all that I can. Other auto parts stores are just out of my way. It ain't worth a bunch a driving in city traffic to to buy a part that costs $1.00 unless it's an emergency or something is broken down. I save up my odd and end things like that to pick up when I'm going that way for other reasons anyway. Thanks! Share this post Link to post Share on other sites
DorkFish 42 #11 Posted May 1, 2016 On 4/19/2016 at 11:07 AM, TDF5G said: Walker part # 35323 is the 1.25" size. Most parts stores don't stock them that small but can order them. Amazon also has them for $3.77 + shipping. I had to order one for my C-161 the other day. 1 Share this post Link to post Share on other sites
