Jump to content
cafoose

Brinly attachments

By cafoose, in Implements and Attachments

Recommended Posts

 

Phatboy    565

Phatboy
Posted

I have that exact brinly plow,, but my disc harrow is made by wheel horse ,, but yea both those impliments are awesome ,, 

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Bbo44
      2004 520xi and Plows
      By Bbo44
      SOLD SOLD 520xi with air cooled 20hp Kohler - tractor in great shape and solid. Everything works. Engine was removed a few years ago and cleaned of grass buildup. New head gaskets and PTO seal a few years ago. Engine showed a decent amount of wear but runs strong and fires right up. Didn’t like the wear and needed a zero turn for my property. Would not hesitate to mow with it right now. 1200 hours. Have original paperwork. New air filter, fuel filter, fresh oil & filter. It’s been mowing 3+ acres for 20 years.

      52” side discharge deck complete. Currently mounted on the 520xi- solid, welded/patched cracks and holes. Front roller broken and patched, newer belt. Was just removed and cleaned. Welded chips in blades, but never finished sharpening. Solid deck, decent life left.

      48” wheel horse complete plow for 520xi 79355. Was used for snow. In great shape.

      48” wheel horse plow incomplete for 300 series garden tractor. Was used for parts. Not sure what it is missing but what’s there is very solid.

      MUST TAKE ALL. WILL NOT SEPERATE. Won’t answer if you ask. $750 CASH for everything. Only thing I’d consider selling separate is the 48” incomplete plow for 300 series. Will not deliver.
       

    • Donavon
      Wheel horse 1054
      By Donavon
      Need ideas to convert my 1054 A Frame plow into a snow blower
      Any idea's?
    • cbj75
      Brinly DD-1000 3 pt Tandem Disk Harrow Cat 0
      By cbj75
      Brinly Model DD-1000 3 PT Cat 0 Lift Type Tandem Disk Harrow.
      Sand blasted and repainted 2018--not used since rehab.
      Can deliver with in 500 miles of Mc Cormick SC for additional $100.00.
       
      Bryce Johnson
      117 Kirkland Dr.
      Mc Cormick SC 29835
      Cell 913-638-6788

      Brinly Moldboard 3 PT Tandem DiskHarrow Model DD-1000.pdf
    • RJ Hamner
      Will it fit?
      By RJ Hamner
      Will the plow I am using on my C121 and C160 work on a 876?  
      or is the plow frame different?
      Thanks
      Bob
    • Nuzmuz
      Rear Mounting Bracket Mod for Tiller and Plow
      By Nuzmuz
      Just wanted to show a modification I did to my 1990 310-8. I recently picked up a 36” tiller for my horse and I tried it out on my new garden area. After hitting a rock, it knocked one of the axle brackets open dropping the right side of the tiller. On a manual I viewed, it had clevis pins to hold the lever in, but my bracket did not have them. I drilled a 1/4” hole through on each lever and mounted a 1/4” clevis pin and hairpin cotter to reinforce the lever. I read on another post to just tighten the bolts on the levers, but I think this will work a little better. Hope this helps someone!



×
×
  • Create New...