BIG SHOW 2016 BUY/SELL/TRADE THREAD HERE!

[Amcwheel85 2,059]

Selling my 36 inch rear discharge deck off my C-81 as I have other plans for the tractor and have no need for the deck. It's in great working condition with only a few spots of surface rust, no holes or patches. Blades are good and spin nice. Could use one deck wheel, Tractor mowed great til it broke a rod $200 and that comes with tach a matic pulley SOLD!

Edited June 9, 2016 by Amcwheel85

[SPINJIM 1,981]

DUALIES  /  DUAL WHEEL ADAPTERS with mounting bolts for rear wheels,  $100 delivered at WH show.

Used excellent condition.

 

 

[Ed Kennell 38,170]

9 hours ago, Amcwheel85 said:

Selling my 36 inch rear discharge deck off my C-81 as I have other plans for the tractor and have no need for the deck. It's in great working condition with only a few spots of surface rust, no holes or patches. Blades are good and spin nice. Could use one deck wheel, Tractor mowed great til it broke a rod $200 and that comes with tach a matic pulley

 

 

PM sent

[Smemsic 19]

I am looking for the dual wheel adapters, any chance you have them and how much?

[19richie66 17,500]

2 posts above Smemsic 

Edited June 10, 2016 by 19richie66

[SPINJIM 1,981]

9 hours ago, Smemsic said:

I am looking for the dual wheel adapters, any chance you have them and how much?

 

Thanks for your message.   I still have them.  Just listed them last night.   Asking $100, and can bring them to the big show.  I plan to be there Thurs. through Saturday.

   Jim

[Terry M-(Moderator) 2,175]

running board set-up from a B-60. $40. any interest, send me a PM.  Thanks

 

[Wheel-N-It 2,969]

Hey Guys,

I apologize for not being part of the action so far this year. Nothing wrong, just working too much and getting stuff done at my house so I can take some vacation this Summer and also attend the Big Show. So Yes I am planning to attend again this year. OK, I need the right side (or drive side) belt guard for my WH 701. I also need some rear axle seals for it too. I'll be there on Thursday. I hope someone can help me with this. I might not be able to get back to Red Square till Monday, so if one of you sends me a PM or replies to this post please don't be upset with me if you don't hear back from me till Monday. I really look forward to seeing all the good friends I have made here and at the previous Big Shows

Van

[953 nut 55,218]

2 minutes ago, Wheel-N-It said:

really look forward to seeing all the good friends I have made here and at the previous Big Shows

Looking forward to seeing you too Van. See if you can get a room at the Comfort Inn, lots of us will be staying there.

[Wheel-N-It 2,969]

Sounds good to me Mr. Schmidt! I'll run it by Jay. He is riding with me this year. We were planning to camp again this year but I will be just as happy staying in a nice comfortable motel

[squonk 41,100]

The "Honey Moon Suite " should be available!  Or if you still want to camp, Gander Mountain next door has all kinds of room in the store. You could do a working camp display.

[whfan74 2,066]

These items can be at the show if spoken for ahead of time.

 

RJ/Suburban inner wheel weights freshly powder coated. $160

 

 

Disc $100

 

HL-5 lights as seen $200

 

Hubcaps $150

 

newer style hubcaps $125 (have 2 complete sets)

 

NOS 6" caps. $60 a set

 

Good starter off off of a 520-H  $55

 

NOS Kohler tank. $85

 

NOS Kohler tank $75

 

Various us horizontal and vertical shaft engines available.....brand new old stock.  Cheaper than retail.  Will try and update a list....over 20 brand new Kohler, Briggs, and Tecumseh engines.  These are all of the newer style.

 

Brand new Dolmar saws with a free carrying case.  $290-$300

 

Thanks for any and all interest.  PM me with any questions you may have.

 

 

 

 

 

[Ed Kennell 38,170]

Looking for the arm rests for this Michigan high back seat.

 

[whfan74 2,066]

Beautiful Raider 9

base coat clear coat

runs good but smokes

beautiful restoration

$700. Deposit needed if to be brought to the show

[Amcwheel85 2,059]

Tried to edit my first post for my lawn ranger deck but couldn't. So here it is... I need to sell this so first $80 takes it and that's delivered to the show! 

Edited June 11, 2016 by Amcwheel85

[Ken B 3,164]

I figure its about time I get in on the action... My prices are going to be fair but I'm pretty firm. I'm in Danbury CT. if any locals have interest.

23x8.50 Carlisle ag tires. almost new with rims. 175.00 Ag tires sold!!!

Suburban front tires and rims. Bolt em on and go. Original general tires in very good shape.. 125.00

Old style Wheel Horse hub caps in nice condition. 150.00

K91 Kohler. Missing some parts such as recoil and a few other small things but when it was on one of my tractors it ran pretty good. 75.00

Mower deck I had under my 854 that cut beautiful and ran quiet. No cracks anywhere.This mower deck is something I haven't seen before, it is diamond plate on top. Nice enough job that it looks factory? Needs the two deck belts. 75.00

Edited June 13, 2016 by Ken B

[prondzy 3,881]

Thought I'd post better pics of this NOS hood MAKE ME AN OFFER but for formality reasons $1

[SALTYWRIGHT 859]

KEN, I WILL TAKE THE TWO AG TIRES AND WHEELS.     RUSS

[Ken B 3,164]

7 minutes ago, SALTYWRIGHT said:

KEN, I WILL TAKE THE TWO AG TIRES AND WHEELS.     RUSS

You got it Russ, what day will you be at the show? Ken

[stratostar250 919]

I have a good running 1986 310-8 that I will be bringing to the show. It has a rear end with the 1 1/8" axles from a C-111 after the original locked up on me.  It will come with a 37" deck that works fine and a parts 37" deck with a large rust hole in it, but has good spindles, and could be repaired if someone really wanted. Seat is only 2 years old, left rear tire has a small leak, and the battery is alright as long as you start the tractor every now and then.  At the show, I'll ask $350, but for you Redsquare guys, I'll take $250.  Message me if interested! Thanks!

 

 

 

 

 

 

 

 

 

 

Edited June 13, 2016 by stratostar250

[Fun Engineer 859]

Looking for a set of good condition used 18x9.5x8 tires. 

[rmaynard 15,456]

Set of Carlisle tires and rims. 22x7.50-12. Good tread. Need good cleaning. 

 

[stratostar250 919]

Also, if anyone would be interested, this could be brought along to the show.  It is a 656,  I fixed the electric start, bought a new carb, installed a condensor, coil, new points, and air filter, and can only get her to run for maybe 30 seconds at a time, if I can get it started.  When she runs though, she sounds good and doesn't smoke at all.  I may bring this along if someone is interested in it.  It has a slot hitch on the rear as well, and has newer tires all around, I'd like to get $300.  

 

 

 

[turnnleft 11]

I need 3 piece rj trans

[Racinbob 11,076]

Contact Lane Ranger. He may have one to sell.

@Lane Ranger