Amcwheel85 2,059 #101 Posted May 20, 2016 Well it prolly because nobody knows what they fit. So if someone does or they can find a use for them I will sell them cheap Share this post Link to post Share on other sites
buffaloman 295 #102 Posted May 21, 2016 867 , nice straight steering wheel , generator was tagged that it was rebuilt in 2001 , I don't think it was ever ran since then but it is still turning freely. the back tires look to have good tread and seem pretty solid , the fronts are dry rotted pretty bad in the inside walls. the motor is tight but I don't believe its blown and it is missing parts. sheet metal is very nice and straight 1 Share this post Link to post Share on other sites
Amcwheel85 2,059 #104 Posted May 21, 2016 (edited) Selling my 856... Runs great with no smoke or noises(was rebuilt about 4 years ago) the oil pan gasket leaks just a drop after you run it awhile but I have the full engine gasket kit new. The ags I the rear are like new and the tri bars on the front are brand new.. The battery is weak so would need a new one. I run ethanol free gas in it. All gears work great. Pm, call or text with any questions! 607-368-0308 $450 scratch that.. Make it $400 or make offer! For any member here. SOLD!! Edited May 24, 2016 by Amcwheel85 3 Share this post Link to post Share on other sites
RedHorse54 578 #105 Posted May 22, 2016 (edited) Hydrostatic transmission: $75. It works great Rear End: $75. Not locked up, it works great Wheel horse rims: $75 or best offer Rear wheel weights: $75 or best offer Edited May 27, 2016 by RedHorse54 Share this post Link to post Share on other sites
limited12 360 #106 Posted May 24, 2016 (edited) Found some hubcaps that I will bring to the show if anybody wants them 2 10" and 4 8", no rust but does have some scratches and a couple of dents in the 10" 100.00 for all Edited May 30, 2016 by limited12 1 Share this post Link to post Share on other sites
Terry M-(Moderator) 2,175 #107 Posted May 25, 2016 A couple years ago I started collecting License plates. I have found several states already but thought I'd use this opportunity of traveling East to the Big Show to maybe find some more. I'm not looking for anything collectable or Antique....Just want a fairly recent ,generic looking vehicle plate from every state I can find. Pretty much need most of the states east of the Mississippi except for Wisconsin , Alabama, and Virginia. I'd also really like to find our 49th and 50th state also(which is probably going to be nearly impossible,LOL) So if your going to the Big show and have something in decent shape you wouldn't mind giving up, I'd appreciate the help. Thanks, Terry M 1 Share this post Link to post Share on other sites
Racinbob 11,077 #108 Posted May 25, 2016 You can check Florida off your list Terry. 2 Share this post Link to post Share on other sites
Ed Kennell 38,170 #109 Posted May 25, 2016 I can bring a PeeeA plate. 2 Share this post Link to post Share on other sites
JPWH 6,033 #110 Posted May 25, 2016 I'll bring a GA plate. 1 Share this post Link to post Share on other sites
SALTYWRIGHT 859 #111 Posted May 25, 2016 WHERE DO WE FIND YOU ? I WILL BRING CT. 2 Share this post Link to post Share on other sites
Terry M-(Moderator) 2,175 #112 Posted May 25, 2016 51 minutes ago, SALTYWRIGHT said: WHERE DO WE FIND YOU ? I WILL BRING CT. Thank you everybody..I'm not sure yet where I'll be. Look for Stevasaurus, and maybe he could point me out. Thanks again 2 Share this post Link to post Share on other sites
953 nut 55,223 #113 Posted May 25, 2016 7 minutes ago, Terry M said: Thank you everybody..I'm not sure yet where I'll be. Look for Stevasaurus, and maybe he could point me out. Thanks again We could make this a little scavenger hunt, We will have our Supporter Member banner and a licence tag hanging out for you to see. Put me down for a NC plate. 4 Share this post Link to post Share on other sites
roadapples 6,983 #114 Posted May 26, 2016 Ed beat me to the Pa. tag..... 1 Share this post Link to post Share on other sites
squonk 41,104 #115 Posted May 26, 2016 11 hours ago, Terry M said: Thank you everybody..I'm not sure yet where I'll be. Look for Stevasaurus, and maybe he could point me out. Thanks again Just hang around the bus stop with a sign around your neck! 7 Share this post Link to post Share on other sites
jsp_333 268 #116 Posted May 26, 2016 (edited) SOLD I will be selling my '57 rj 35. Included are 3 additional Kohler K-90's - 1 working 2 for parts. The hood is in great shape - dead straight no rust holes gouges etc. Gas tank doesn't leak. Kill switch has been added since photos were taken. The only non- original parts are 2 engine shrouds and a reproduction belt guard which is currently on order from Joe Papke. Although the engine came to me as a rope start I do have a Schnake pull start for the engine. I'm looking for 1750.00 - OR BEST OFFER. Would consider a trade for another Wheel Horse tractor I'd be looking for something in C, D, 400, 500 series 18 horse or better. Kohler definitely. Preference is 8 speed. Edited May 27, 2016 by jsp_333 sold 5 Share this post Link to post Share on other sites
RedHorse54 578 #119 Posted May 27, 2016 (edited) I must sell my parts to get them out of the garage. I WILL TAKE $150 FOR THE TRANSMISSION AND THE REAR END TOGETHER OR $75 A PIECE Edited May 27, 2016 by RedHorse54 Share this post Link to post Share on other sites
wheelhorseman 3,211 #120 Posted May 27, 2016 Hello all I am looking for some welded together hydraulic cylinders ( see picture ) they were used on tractors in the 70s - it don't matter if they leak profusely just as long as the rod is not rusted or pitted - please PM me if you have any that you would part with. Thanks Lowell 3 Share this post Link to post Share on other sites
Amcwheel85 2,059 #121 Posted May 28, 2016 (edited) I did not want to do this but I have too... Selling my A-81, it's in really nice original shape, does run but needs alil more carb work as I put new float and needle/seat in it and still is flooding over. Also the other day I got it out and for some reason it wouldn't do anything with the key. I will be looking more into it this weekend... When it runs has no smoke or noise. Mows great and deck is in awesome shape. $300 obo Any questions pm, call or text me anytime! Thanks Can deliver to big show in pa! 6073680308 Edited May 28, 2016 by Amcwheel85 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #122 Posted May 28, 2016 c 1 Share this post Link to post Share on other sites
Amcwheel85 2,059 #123 Posted May 28, 2016 (edited) Also bringing this seat and stack that came on my 753. $20 for the seat only has one lil crack on corner. $10 for the stack (needs new bolt for clamp) pm, call or text me 607-368-0308 thanks greg. SEAT IS SOLD! Edited May 29, 2016 by Amcwheel85 Share this post Link to post Share on other sites
squonk 41,104 #124 Posted May 29, 2016 (edited) Home Made rock rake for slot hitch. A Wallfish creation with some of my mods added. Quite beefy driveway maintainer. $100 SOLD!!! Edited May 30, 2016 by squonk 3 Share this post Link to post Share on other sites
Shynon 7,459 #125 Posted May 30, 2016 On 4/17/2016 at 9:27 AM, Shynon said: I have a B1290 Clinton, been sitting 2yrs. started right up runs great. Oil pan looks wrong but has mounting holes in pan I believe will bolt right up on an RJ/Suburban asking $300 will throw in a locked up B705 COB Clinton as it looks like the oil pan would be correct ( I am not a Clinton expert) Have another B1290 Clinton motor, has spark, $200 Also have an NOS auger and scraper bar for a Wheel Horse 2 stage blower $100 for both. Feel free to make offers. I am looking for a Wheel Horse 4 wheel wagon or a side mount sickle mower, GT 14 WW-93 rear wheel weights, or a 633, 754 looking for a Brinly 12" plow Auger and scraper bar have been sold. Thanks Share this post Link to post Share on other sites
.JPG.9f2ecb26065c66527b0730084ab7fc7a.thumb.jpg.7dc8a04d9a53d44ee2b23f26ee94496f.jpg)