Cole J. 71 #1 Posted March 30, 2016 I seen a post on an other tractor forum I'm apart of, and it was about a temperature gauge for your hydro trans. I was wondering if anyone on here has tried this on their own tractor. Share this post Link to post Share on other sites
Phatboy 565 #2 Posted March 30, 2016 I havent myself ,, but im sure its a good idea .. And would be interested in learning how they do it.. 1 Share this post Link to post Share on other sites
pfrederi 17,970 #3 Posted March 30, 2016 D series came with hydro temp gauges. i know where to mount one on a sundstrand hydro not sure about the Etons Share this post Link to post Share on other sites
Cole J. 71 #4 Posted March 31, 2016 I personally have a sundstrand hydro, on the other forum they were talking about putting the thermostat plug in the drain hole then every time you changed the oil you could check the thermostat as well. how did you set up your hydro Pfrederi ? Share this post Link to post Share on other sites
19richie66 17,530 #5 Posted March 31, 2016 I would be interested to know this also. I want to run a temp gauge in a sunstrand C-175. Should be close to the same set up? Share this post Link to post Share on other sites
82Caddy 851 #6 Posted March 31, 2016 Here is where the temp sensor is mounted on my d series pump. 1 Share this post Link to post Share on other sites
